Timbren Rear Suspension Enhancement System For a 2016 Forest River FR3 30DS

Question

Question:

Hi, I have an FR3 30DS from 2016 and I would like to strengthen the rear suspension. The kit # TFRF53A is for 2 rear odds of the FR3 30DS? Thanks,

asked by: Fred G

1

Helpful Expert Reply:

Yes, the Timbren Rear Suspension Enhancement # TFRF53A contains 2 add on springs. You will get one spring for each side of your 2016 Forest River FR3 30DS.

You will need to raise the rear axle of your FR3 slightly off the ground to install these as per the instructions that I have linked below.

expert reply by: Bud M

1

Answer 1

I reached out to my contact at Timbren and this is something that is not all that uncommon. If the brake lines on the axle of your 2013 F53 Chassis are underneath the Timbren Rear Suspension Enhancement #TFRF53A you can carefully bend them out of the…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

First of all you will need the Roadmaster Direct-Connect Base Plate Kit 524470-5 #RM97RR for your 2024 Ford Maverick. The item #RM39FR you found is Roadmaster part number 524465-5 which fits certain Ford Escapes. Do understand the baseplate above…

view full answer...

Answer 6

For your 2023 Coachmen Pursuit 31BH you will need the Front SumoSprings Rebel Custom Helper Springs #SSF-170-40-2 and Rear SumoSprings Maxim Custom Helper Springs #SSR-184-40-1. If you were to select only one to install first I recommend the rear…

view full answer...

Answer 7

I spoke to my contact at Timbren and she emailed me a picture of a Timbren #TFRF53A with handwritten dimensions drawn on the picture. See attached picture. I attached installation instructions for this product for you to check out.

view full answer...

Answer 8

For your 2024 Ford F-53, I recommend checking out the Timbren Front Suspension Enhancement System #TFFF53B for the front, and the Timbren Rear Suspension Enhancement System #TFRF53A for the rear. These kits do not require drilling, will replace your…

view full answer...

Answer 9

Personally I wouldn't go with Timbren's for your needs. They're essentially rubber bump stops that prevent your suspension from flexing when weights placed on the rear of your Canyon. The major issue with them is comfortability when you…

view full answer...

Answer 10

When comparing the ride quality between the Timbren #TFFF53B and SumoSpring #SSF-172-40-2 I recommend going with the SumoSprings. Although Timbren is a very solid product, the SumoSprings have been proven to have more of a forgiving support over the…

view full answer...

Answer 11

The SumoSprings Rebel Custom Helper Springs - 2 Piece - Front Axle #SSF-170-40-2 are a confirmed fit and the two piece design does allow for the full suspension travel to allow your vehicle suspension to work to it's best capacity without…

view full answer...