Truxedo Lo Pro QT Tonneau Replacement Tarp for 2008 Ford F-150 6-1/2 ft Bed

Question

Question:

I have looked everywhere for a model number for the cover on my 2008 Ford F-150. The only thing close to a number is on the tag for the cover tensioner. This number is P/N 1113645. I dont know if you can match a replacement cover to that number. This replacement is for a 2008 F-150 Ford Lariat Super cab. The box is 67inch long. The rubber tag sewn on the cover reads low profile.

asked by: Dennis B

0

Expert Reply:

That part number indicates you have a Truxedo Lo Pro QT tonneau on your 2008 Ford F-150 with a 6-1/2 foot bed so for a tonneau tarp replacement you'd want the # TX1117655 and you'd be set.

expert reply by: Jameson C

0

Answer 1

Yes, the replacement tarp for the TruXedo Lo Pro QT Soft Roll-up Tonneau Cover part #TX598101 is the Replacement Cover for TruXedo Lo Pro QT Soft part #TX1117655. This tarp is for a 2010 Ford F-150 with the 6-1/2' bed.

view full answer...

Answer 2

I verified with TruXedo that the tonneau cover you have on your 2004 Ford F-150 is the Lo Pro QT #TX578101. The replacement tarp you need is #TX1117655. It does not come with the rails.

view full answer...

Answer 3

The Replacement Cover #TX1117655 is the correct fabric for the TruXedo Lo Pro Soft Roll-up Tonneau Cover #TX578101 that you have on your 2006 Ford F-150 with the 6-1/2' bed.

view full answer...

Answer 4

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 5

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 6

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 7

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 8

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 9

The only way you could power interior dome lights on a trailer without it being connected to a tow vehicle would be to power the lights with a battery like a breakaway battery. How you choose to wire up the batteries will in the end be up to you, but…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 12

Based on my research, the Trailer Hub and Drum Assembly - 8,000-lb E-Z Lube Axles #AKHD-865-8-EZ-K will be a replacement for the 90865 Rockwell hub and drum. Both of these hub and drum assemblies are 12-1/4" diameter, have an 8,000 lb capacity,…

view full answer...

Truxedo Lo Pro QT Tonneau Replacement Tarp for 2008 Ford F-150 6-1/2 ft Bed

Product Page this Question was Asked From

Continue Researching