Trailer Wiring Harness Recommendation for a 2004 Jeep Grand Cherokee without Tow Package

Question

Question:

which part number fits the 2003 Jeep Grand Cherokee Larado without a tow package.

asked by: Steve S

0

Expert Reply:

Since you do not have the tow package I am assuming you do not have a factory trailer connector. In that case I would recommend you get a Curt T-Connector Custom Fit Vehicle Wiring # C55369.

This is the recommended wiring harness for the 1999-2004 Jeep Grand Cherokees, I attached a review video and installation instructions for this product for you to check out also.

expert reply by: Jameson C

0

Answer 1

In 2004, the Jeep Grand Cherokee either came with a factory installed 7-Way harness at the rear of the vehicle or no trailer connector. The towing prep package may not necessarily include the 7-Way, but it could still have the tow package. This…

view full answer...

Answer 2

The hitch that you referenced the Curt #13051, is indeed a class III hitch that is confirmed as a fit for your 2004 Jeep Grand Cherokee. I have included a video of this installation for your reference. Since your Cherokee does not have any existing…

view full answer...

Answer 3

To install a trailer light, you will want to use part #C55369, a Curt T-Connector that is designed to work cooperatively with the vehicle computer and wiring. It plugs into a port in the cargo area, behind a panel on the driver side. I have added a…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 12

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...