Tekonsha Vehicle Wiring Harness For a 1996 Ford Explorer With Factory Trailer Wiring
Question:
Hello there 1996 Ford Explorer XLT with dealer tow package. Does your connector controls both rear turn signals, both break lights, also the rear running lights when are turned on, as well as the license plates 2 lights. My harness actually has a connecter already attached to it. Not just a dust cover. Which has only 2 pins in it that run to the 2 license plate lights. One pin each. The harness has space for 8 pins but only 5 have a wire end for the pins. 2 are uses for the license plate lights which leaves the other 3 only. My question is how many pins are inside your connector and what spaces are they located in the connector. Also, I think I would need to add the 2 pins for the plate lights. Is there the red center in the connector that one can remove to add and rearrange the pins. I hope this makes sense.
asked by: Steve O
Expert Reply:
The Tekonsha Tow Package Wiring Harness # 118241 for your 1996 Ford Explorer will have 4 pins located inside the connector. The 4 pins are located on the side with the pin that is located a 3 o'clock from the connector. These pins will control both turn signals, brake lights and the trailer running lights, they do not have points for the license plate lights as well. You will not be able to move the connectors around as they would have to share 2 of the same pins.
First be sure that you have located the correct connector as on the Explorer there can be multiple connectors. Typically it is found on the passenger side of the bumper rather than the drivers side as is commonly found on the Ford Ranger.
If you are unable to find the other connector than you will need to use the new Tekonsha harness and use Quick Splices # SWC502905-1 to wire in the license plate light. You will wire into the power wire and running light circuit for the plate light.
Products Referenced in This Question
Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18 Gauge - Blue - Qty 1
- Wiring
- Wire Connectors
- Quick Splice Connectors
- 18-16-14 Gauge
- Spectro
more information >
Product Page this Question was Asked From
Tow Package Wiring Harness with 4 Pole Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Quick Splices - Self-Stripping Connector - Closed Port - 14-16-18 Gauge - Blue - Qty 1
- Video: Hopkins Wiring - Trailer Connectors - HM47910 Review
- Shop: Hopkins Endurance 5-Way Flat Trailer Connector - Trailer End - Ergonomic Design
- Video: Review of Bauer Products RV Door Parts - Magnetic Compartment Door Holder - BA38VR
- Shop: Magnetic Door Catch for RV Baggage Doors - 1-1/2" Diameter - Qty 1
- Shop: Bauer Products Magnetic Door Holder for Compartment Doors - Negative - 2-1/2" Long
- Search Results: 5 way plug
- Video: Spectro Wiring SWC502905-1 Review
- Video: Hopkins Endurance 5-Way Flat Trailer Connector Installation
- Shop: Trailer Wiring
- Shop: Hopkins Endurance 5-Way Flat Trailer Connector - Vehicle End - Ergonomic Design
- Shop: Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug
- Search Results: 5 pin flat connector
- Search Results: 5 pin connector
- Search Results: 7 pin flat connector
- Video: Wesbar Wiring - Wiring Adapters - 707250 Review
- Shop: Trailer Hitch
- Shop: Wesbar Adapter - 7-Way RV to 4-Way or 5-Way Flat - 18" Long
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Search Results: hitch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It
- Article: Trailer Wiring Diagrams
- Search Results: brake controller
- Shop: Brake Controller