Can Remote be Added to Dutton-Lainson TW4000 StrongArm Electric Winch DL25200

Question

Question:

Adding remote to a dl25200. I often fish alone and need a remote so I can hold my 16 foot boat in position for staying centered on the rollers. Thank you.

asked by: Don V

0

Expert Reply:

There is indeed a remote available for you to add to your Dutton-Lainson TW4000 StrongArm Electric Winch # DL25200. What you need is the following part:

- Dutton-Lainson Remote Hand-Held Switch for DC StrongArm SA Series Electric Winches # DL24054

expert reply by: Kyle S

0

Answer 1

There could be two possible reasons as to why the clutch is not engaging when you are pulling in your boat with the Dutton-Lainson TW4000 StrongArm Electric Winch part #DL25200. The first reason is the simplest to fix and it entails tightening the…

view full answer...

Answer 2

The Dutton-Lainson StrongArm Electric Winch, #DL25200, itself is not trailer-specific, so you could use it with any trailer provided that it is mounted properly. We have several mounting kits available depending on where you would need to mount the…

view full answer...

Answer 3

Yes, if you have a battery in the back of your truck you can connect the wires of the Dutton-Lainson TW4000 StrongArm Electric Winch #DL25200 to power it.

view full answer...

Answer 4

I spoke with my contact at Dutton Lainson and he thought the most likely problem you are experiencing is that the clutch gear and 120 tooth gear are stuck together. He said that in high humidity situations where the winch hasn't been used in a…

view full answer...

Answer 5

The Dutton-Lainson StrongArm Electric Trailer Winch - Marine - 1,500 lbs #TW4015 requires a winch stand or mounting bracket. For the StrongArm you can use the Dutton-Lainson Mounting Adapter Plate for StrongArm Electric Winches #DL24055 if you have a…

view full answer...

Answer 6

The winch for a boat trailer is selected based on the weight of the boat. As a general rule of thumb we use a 2:1 ratio meaning the winch needs to be rated for at least half the weight of the boat. If the trailer has rollers or bunks this can…

view full answer...

Answer 7

I went out to the warehouse to measure the Dutton-Lainson Angle Mounting Plate, #DL24059. The internal width of the U-bolt is 3-1/6 inches. The length is 5 inches. As long as the post is 3 inches wide by 4 inches deep, it will fit.

view full answer...

Answer 8

The Dutton-Lainson Winch part DLB800A that you referenced is not an electric winch. It is a brake hand winch with an 800 lb capacity which is similar to our part #DL16331. With that being said, all of the Dutton-Lainson StrongArm Electric Winches…

view full answer...

Answer 9

The Dutton-Lainson StrongArm Electric Winch #DL25215 doesn't come with a mounting plate but you can use part #DL24055 or #DL24059 if your current mounting bracket doesn't match with the mounting hole pattern for this winch (see attached).

view full answer...

Answer 10

There is not currently a boat winch with a wireless remote we offer, though the Dutton-Lainson StrongArm Electric Trailer Winch #TW4015 you referenced comes with a handheld remote and there isn't an option for a wireless remote with this…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Can Remote be Added to Dutton-Lainson TW4000 StrongArm Electric Winch DL25200

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching