Rhino Rack Pioneer Platform Tray that Fits 2021 Toyota RAV4 Prime with Flush Rails

Question

Question:

Curved crossbars that came with my new RAV4 Prime XSE are useless in my opinion. I had straight round Yakima crossbars on my previous Subaru Crosstrek Hybrid and they were great for carrying lumber, kayaks, etc. Dont see how curved crossbars have any such utility. Im thinking a Rhino-Rack Pioneer Platform Rack would be idealif compatible with my RAV4 Prime Plug-In Hybrid. Please advise.

asked by: William W

1

Helpful Expert Reply:

Curved crossbars are pretty common for OEM roof racks since they allow for a consistent gap between the bottom of the bar and the curved roof.

What you could do is remove your OEM rack and install the Rhino Rack Pioneer Platform part numbers # RR55FM which was custom fit for the roof of your 2021 Toyota RAV4 and gives you a totally flat platform that measures 52 inches by 49 inches.

expert reply by: Jameson C

1

Answer 1

The most aerodynamic crossbar on the market is the Thule WingBar Evo Crossbar. The Yakima CoreBar and Yakima Jetstream are both comparable but Thule does have the edge in reduced wind noise and drag. They can all however be easily removed and…

view full answer...

Answer 2

We can set your 2021 Toyota RAV4 up with a platform rack, and the XLE model should have flush-mounted side rails (as opposed to raised side rails), which the rack will attach to. The best option for a platform rack is from Rhino-Rack: - Rhino-Rack…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 5

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

Seal 171255UC has an inner diameter of 1.719 inches and outer diameter of 2.565 inches. A seal that has those dimensions would actually be #58846. I've added a link to a video review of this seal for you to take a look at.

view full answer...

Answer 8

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 9

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 10

You can get a new brake mounting flange for your axle. The old flange will need to be cut off. The part is #4-44-1. This is designed to fit a 3 inch trailer axle and should be welded in place by a professional. Since you would also have to get the…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Rhino Rack Pioneer Platform Tray that Fits 2021 Toyota RAV4 Prime with Flush Rails

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching