Which Trailer Lights will Fit a Fulton Fender F008595?

Question

Question:

Do you have the trailer lights to fit a Fulton fender. the back tail light is red and the forward side has a yellow light. thanks.

asked by: Bill

0

Expert Reply:

As I couldn't tell if the lights in the picture are LED or incandescent, I included with both options.

For incandescent lights, you will need the Optronics Mini Trailer Clearance or Side Marker Light - Submersible - Incandescent # MC95RB for the red light and # MC95AB for the amber light.

For LED lights, you will need the Optronics LED Clearance or Side Marker Light - Submersible - 3 Diodes - Rectangle # MCL95RB for the red light and # MCL95AB for the amber light.

All of these lights are the same size and mount the same way. Typically these are mounted to a metal surface as this is how they are grounded. If you are mounting to a plastic fender, you will need to run a ground wire from the post on the back of the lights to a metal surface that is not aluminum.

expert reply by: Lazer S

0

Fulton Fender With Lights
(click to enlarge)

Answer 1

The Fulton Fender #F008595 does not come with any marker lights. You'll need to reuse the ones from your current fender, or if you can send me pictures of the style light you have I can find replacements for you.

view full answer...

Answer 2

Though I may have an alternative option available that will work for your 2001 Bison horse trailer, I was not able to find anything with the 150-016 number, unfortunately. With that said, check out the Optronics Thinline LED Trailer Fender Light…

view full answer...

Answer 3

A breakaway like the Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Top Load #3802308 is weatherproof but not waterproof. Although it can stand up to rain you do not want to submerge it. The breakaway can be…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Since both a ST145/R12 size tire, like the Kenda Karrier S-Trail #AM10130, and a 5.30-12 size tire, like the Kenda K353 #AM10068, fit a 12 inch wheel, a ST145/R12 size tire can replace a 5.30-12 size tire. Keep in mind that these tires do have…

view full answer...

Answer 8

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…

view full answer...

Answer 9

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 10

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

Answer 11

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 12

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Which Trailer Lights will Fit a Fulton Fender F008595?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching