Which OEM Prep Adapter for Ram Pucks to Use with Pullrite Super Glide

Question

Question:

I have a pull rite super glide 3300 do you sell an adapter to ram puck system

asked by: Jeremy W

0

Expert Reply:

Assuming that your Pullrite hitch is designed to fit into industry standard base rails and you've got a 2014-2021 Ram 2500 or 3500, then you can use the Demco 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package - 25,000 lb # DM6099.

If your Pullrite hitch mounts to special rails then you would need to secure that part through Pullrite.

expert reply by: Erik B

0

Answer 1

We do have an adapter that will allow you to mount your PullRite SuperGlide 5th wheel hitch to your 2021 Ram 2500 with the factory puck system, so long as the SuperGlide is the ISR series (ISR stands for Industry Standard Rails). If you do have the…

view full answer...

Answer 2

Yes, since you said ISR (industry standard rail) your PullRite hitch will fit the Demco fifth wheel Ram hitch prep package adapter part #DM6099 that you mentioned. This adapter fits your Ram factory rail kit and provides the rails needed for your…

view full answer...

Answer 3

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept…

view full answer...

Answer 4

So the Pullrite 2900 series fifth wheel hitch (one we don't carry) is designed to fit industry standard fifth wheel rails so to fit it to your 2021 Ram 2500 that has the OEM rail kit you'd need just the part #RP30154.

view full answer...

Answer 5

For your 2020 Ram 2500 I recommend going with the Reese M5 #RP30918. I personally like the M5 because it is newly updated and has a few upgrades to offer that will just make your life easier. It has 4" of height adjustment, an offset for…

view full answer...

Answer 6

If you have the factory prep package and need to add a set of industry standard above bed base rails we have a few options for the 2015 Ram 3500. I recommend the Adapter Rails for Curt 5th Wheel Hitch part #C29BR. This is a drop-in rail adapter…

view full answer...

Answer 7

The fifth wheel hitches weigh anywhere from around 175 lbs up to about 250 lbs. This being said, some of them like the B&W Companion #BWRVK3600 can be easily broken down into two more manageable pieces with the hitch head weighing about 65 and…

view full answer...

Answer 8

While there is no need for a slider hitch for a long bed truck, there is no reason you couldn't use one in a long bed truck. Normally when we get this question the slider hitch is a manual slider and we recommend just leaving the slider in the…

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Great question, Jeff! When the Rota-Flex first came out it renovated what a pin box could do and be, but at this point in time that technology is a little more dated and the Gen-Y Hitch Shock Absorbing 5th Wheel Pin Box #325-GH-8040 is the "new…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Which OEM Prep Adapter for Ram Pucks to Use with Pullrite Super Glide

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching