Does Superglide ISR 2900 Hitch Fit Demco Ram Rail Kit Adapter DM6099

Question

Question:

will a superglide 2900 isr mount on a demco standard rail plate for ram puck system?

asked by: Chris

0

Expert Reply:

Yes, since you said ISR (industry standard rail) your PullRite hitch will fit the Demco fifth wheel Ram hitch prep package adapter part # DM6099 that you mentioned.

This adapter fits your Ram factory rail kit and provides the rails needed for your Pullrite hitch so it will work great.

expert reply by: Jameson C

0

Answer 1

We do have an adapter that will allow you to mount your PullRite SuperGlide 5th wheel hitch to your 2021 Ram 2500 with the factory puck system, so long as the SuperGlide is the ISR series (ISR stands for Industry Standard Rails). If you do have the…

view full answer...

Answer 2

Assuming that your Pullrite hitch is designed to fit into industry standard base rails and you've got a 2014-2021 Ram 2500 or 3500, then you can use the Demco 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package - 25,000 lb…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 5

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Answer 6

I spoke with my contact at Trailair and from your serial number we were able to determine that your trailer came with a 1621 HD pin box which is a long pin box style. I was unable to obtain the exact part number for your Trailair pin box but from the…

view full answer...

Answer 7

As long as the RBW Lil' Rocker mounts to industry standard base rails you'll need the Curt Adapter Rails #C29BR that fit in the OEM puck system on your 2019 Ram 2500 and give you a standard base rail connection. I'm attaching a photo…

view full answer...

Answer 8

The Ram OEM 5th wheel puck system, shown in the linked photo and article, was launched in 2013 so what you have in your truck is likely to be an aftermarket installation of some kind. These newer Ram trucks with the factory prep can directly accept a…

view full answer...

Answer 9

There should be a sticker or plate on the pin box itself that lists the manufacturer and model of the pin box. If it is not present then there are some measurements you can take to determine the model of the pin box. I have included a link that…

view full answer...

Answer 10

Hey John, Thanks for the purchases and you have everything you need except the wedge. I verified directly with Reese that the correct wedge to use with the Demco Recon 5th Wheel Trailer Hitch #DM8550043 and Reese Sidewinder #RP34FR is the following:…

view full answer...

Answer 11

So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough for…

view full answer...

Answer 12

Hi James, To my knowledge the Reese Goosebox is the only replacement option that won't void the frame warranty. That being said, the frame warranty is typically only a year so you really aren't losing much voiding it, especially if you've…

view full answer...

Does Superglide ISR 2900 Hitch Fit Demco Ram Rail Kit Adapter DM6099

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching