Which Motor and Fan Blade Replacements Fit a Ventline V2262-50?

Question

Question:

Please see pics. Mine is in a manufactured home. It has a screw thread on the center bar that the motor plugs into. This is so you can screw-on the plastic cover. What is the correct motor replacement and can I also get it with or w/o the blade attached?

asked by: KM K

0

Expert Reply:

We definitely have replacements for your Ventline 2262-50 motor and fan blade. With that being said, the Replacement 110-Volt AC Fan Motor for Ventline RV Bathroom Insert Fan with 50 CFM Capacity # BCD0388-00 will be a direct replacement. There does seem to be a couple different size fans that may have been used, but it does look like the Replacement Fan Blade for Ventline Bathroom Ceiling Vents - 6-1/2" Blade # BVA0312-00 will be the correct one for you.

expert reply by: Lazer S

0

Ventline V2262-50 Tag
(click to enlarge)

Ventline V2262-50 - A
(click to enlarge)

Ventline V2262-50 - B
(click to enlarge)

Ventline V2262-50 - C
(click to enlarge)

Answer 1

I spoke with my contact at Ventline and he stated that the correct replacement motor for your model V2045 Bathroom Vent will be the Replacement Motor #BCD0390-00. This will include one motor assembly for your existing vent fan.

view full answer...

Answer 2

The correct replacement motor for your Ventline V2262-50 bathroom fan is actually the part #BCD0388-00. This will work perfectly with your existing fan as it is a direct replacement. The #BCD0390-00 Replacement Motor that you mentioned is designed…

view full answer...

Answer 3

The process may differ depending on your exact model of Ventline Fan, but you will first need to gain access to the motor which will likely require you to go in to the assembly from the top/roof. You will then remove the dome/lid or screen which…

view full answer...

Answer 4

The correct replacement motor for your Ventline V2262-50 bathroom fan is the part #BCD0388-00 and it's held on with a couple nuts on top of the support beam like you see in the attached picture. To access the fasteners to remove the beam…

view full answer...

Answer 5

It sounds like the #BCD0314-00 will work for you. The shaft's diameter is 3/16 inches and the entire length from tip of the shaft to the end where the mounting screws go through is 3-1/2 inches. Also the shaft itself is 1-3/8 inches long.

view full answer...

Answer 6

For a replacement motor for your Ventline V2062 you'd need #BCD0314-00 which also fits as a replacement for the V2262.

view full answer...

Answer 7

The motor you sent in a picture of is very similar to the #BCD0314-00 but it is slightly different than the part #BCD0314-00 when comparing the two. It appears as this motor will work just fine as a replacement though. Basically either wire can be…

view full answer...

Answer 8

We've checked with Ventline in the past and we do have a replacement motor for the Ventline V2062 with the part #BCD0314-00.

view full answer...

Answer 9

The correct fan for the motor #BCD0390-00 is going to be the #BCD0311-00, which is a 5-5/8" diameter blade.

view full answer...

Answer 10

The Ventline V2044 Bathroom Ceiling Vent can use the Replacement 110-Volt AC Fan Motor for Ventline RV Bathroom Insert Fan w/100 CFM Capacity #BCD0314-00 or the Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00. We have confirmed with…

view full answer...

Answer 11

Some versions of the Ventline fan V2265 have the plug that part #BCD0390-00 connects right into. Not all of them do and you can cut the connector off and hardwire it in. Or we also carry part #BCD0390-01 and hardwire it. The motors are the same. You…

view full answer...

Answer 12

The correct replacement motor you need for the Philips/Ventline RV vent part number V2044 is the part #BCD0390-00 that you mentioned. We've confirmed this as the correct fit. The #BCD0314-00 fits the 75 CFM versions of the vent like you have…

view full answer...