Accessing Replacement Motor for Ventline V2262

Question

Question:

I have what appears to be a Ventline v2262 in my bathroom. I cant see how to remove the motor assembly. The motor appears to be mounted to the upper section of the mount, but I dont see any release tabs or pry points. Can you tell me how to remove the motor?

asked by: Rod

0

Expert Reply:

The correct replacement motor for your Ventline V2262-50 bathroom fan is the part # BCD0388-00 and it's held on with a couple nuts on top of the support beam like you see in the attached picture.

To access the fasteners to remove the beam will require you to remove the lid of the vent.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The correct replacement motor for your Ventline V2262-50 bathroom fan is actually the part #BCD0388-00. This will work perfectly with your existing fan as it is a direct replacement. The #BCD0390-00 Replacement Motor that you mentioned is designed…

view full answer...

Answer 2

We definitely have replacements for your Ventline 2262-50 motor and fan blade. With that being said, the Replacement 110-Volt AC Fan Motor for Ventline RV Bathroom Insert Fan with 50 CFM Capacity #BCD0388-00 will be a direct replacement. There does…

view full answer...

Answer 3

The motor you sent in a picture of is very similar to the #BCD0314-00 but it is slightly different than the part #BCD0314-00 when comparing the two. It appears as this motor will work just fine as a replacement though. Basically either wire can be…

view full answer...

Answer 4

It sounds like the #BCD0314-00 will work for you. The shaft's diameter is 3/16 inches and the entire length from tip of the shaft to the end where the mounting screws go through is 3-1/2 inches. Also the shaft itself is 1-3/8 inches long.

view full answer...

Answer 5

The Ventline V2044 Bathroom Ceiling Vent can use the Replacement 110-Volt AC Fan Motor for Ventline RV Bathroom Insert Fan w/100 CFM Capacity #BCD0314-00 or the Replacement Fan Motor for Ventline Exhaust Fan #BCD0390-00. We have confirmed with…

view full answer...

Answer 6

The correct replacement motor you need for the Philips/Ventline RV vent part number V2044 is the part #BCD0390-00 that you mentioned. We've confirmed this as the correct fit. The #BCD0314-00 fits the 75 CFM versions of the vent like you have…

view full answer...

Answer 7

Some versions of the Ventline fan V2265 have the plug that part #BCD0390-00 connects right into. Not all of them do and you can cut the connector off and hardwire it in. Or we also carry part #BCD0390-01 and hardwire it. The motors are the same. You…

view full answer...

Answer 8

The correct replacement fan motor you need for your Ventline Breeze that has a 50 CFM fan is the part #BCD0388-00. The mounts are different and the electric connector is different so you wouldn't be able to use the #VC0369-00 instead.

view full answer...

Answer 9

The Replacement Fan Motor #BCD0390-00 referenced in your question is the correct motor for your Ventline V2045 model fan. I did also go out to our warehouse to take a look at the motor and measured a length of 1-1/2 inches for the exposed length on…

view full answer...

Answer 10

Since your Ventline V2265 model fan assembly features the plug-in port for the motor, the correct replacement is indeed the part #BCD0390-00. This is a direct replacement and it will plug right in just like your existing unit. Unfortunately we…

view full answer...

Answer 11

We've checked with Ventline in the past and we do have a replacement motor for the Ventline V2062 with the part #BCD0314-00.

view full answer...

Answer 12

I spoke with my contact at Ventline regarding your Ventline exhaust fan model V2065. He stated that for a replacement motor, you will actually want the Replacement Fan Motor #BCD0390-00. This will work nicely as a replacement on your existing unit so…

view full answer...

Accessing Replacement Motor for Ventline V2262

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching