Recommended Amber Side Marker Light To Replace Discontinued Glo-Brite 410

Question

Question:

I cant find a Glow Lite 410 amber anywhere what do you have that is similar so that I can replace both sides

asked by: Randy T

0

Expert Reply:

I may have a replacement option for you, but the Glo-Brite 410 you mentioned is no longer made.

Based on the information I was able to find your light measures 6-5/8" long x 1-1/2" tall. The closest amber light we have to those dimensions is the Miro-Flex LED Trailer Side Marker Light and Mid-Ship Turn Signal - Submersible - Amber Lens # MCL48AB which measures 6" long x 2-1/4" tall with mounting holes that are 4-13/16" apart on center. This light is an LED light so it does not use a twist in incandescent bulb, and instead will need to get wired into your trailer.

I included a video of the # MCL48AB for you to take a look at.

expert reply by: Samuel C

0

Answer 1

You will need the Hopkins Tail Light Converter #HM48847 to connect a set of lights like the GloLight LED Trailer Tail Light #STL111RCB on your 2001 Jeep Cherokee. This converter will take the tail light 3 wire inputs from the vehicle and combine them…

view full answer...

Answer 2

Based on dimensions alone the closest we have to your GloBrite 410X is the Miro-Flex LED Trailer Light part #MCL48AB which is 6" x 2-1/4".

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 10

When the battery dies on the Galeo Pro GPS Tracking Device #GA94FR you have to replace the sensor as they do not offer a replacement battery. The battery is hardwired into the unit and not something that can be replaced.

view full answer...

Answer 11

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...