Availability Of Shorter Stabilizing Jack For Lippert Ground Control 3.0 Leveling System

Question:

Hello. I have a 10,000 lb Reflection 5th wheel that has 24 1/2inch rear leveling jacks. I only have 6inch ground clearance while driving. Can I use the 22inch lippert stabilizers instead of the 24 1/2? Thanks for the help.

asked by: John D

Expert Reply:

Assuming that you have the Lippert Ground Control 3.0 stabilization system you can replace your current rear jacks with the Replacement 22-1/2" Right Rear Leg for Lippert Ground Control 3.0 Electric Leveling System # LC428493 as they will be a direct replacement.

You will want to make sure you are not maxing out your current jacks as these are 2" shorter, but since you have only 6" ground clearance the # LC428493 should give you plenty of lift.

I included a video of the # LC428493 for you to take a look at.

expert reply by: Samuel C

Ed C.

3/13/2024

What does 6 point system mean. I have 2 Jack's in the front and 2 in the rear. Does that mean I have a 4 point sydtem?

Robin H.

3/14/2024

@EdC that is correct. 6 point really means 6 jacks. Since you have 4 it is a 4 point system.

Ed C.

3/14/2024

@RobinH Does that mean I can use the 6 point jack on my 4 point system?

Robin H.

3/14/2024

@EdC since you have the 4 point system # LC358590 you will need the # LC305339 for the left rear leg or the # LC344792 for the right rear leg. If you need the snapper pin # LC225598 to attach the footpad it is available separately.