Review of BulletProof Hitches Trailer Hitch Ball Mount - Extreme Duty Adjustable 2 Ball 3" - ED306 Video

The great thing about Bearing Buddy like part #BB1781 is that when you add grease to your system with the included fitting, it will move the spring-loaded piston outward and allow grease to seep around the edges to keep from damaging the seal. You…

All 2017 F-Super Duty vehicles equipped with a factory trailer brake controller (TBC) utilize a trailer module (TRM) which initiates the trailer charging system. For trailer charging to operate, the TRM must detect a trailer is connected and a brake…

It depends on the B&W Tow & Stow that you use, but generally speaking you will have enough room as the Towtector mud flaps need 1-1/2" of the shank. For example, the Tow & Stow #BWTS20049B fits just fine with the Rock Tamers…

In regards to choosing the correct weight distribution shank, you really only need to pay attention to the hitch size and rise/drop. The brand won't matter as much as they are all pretty much universal in this regard. The Equal-i-zer Weight Dist…

Toy haulers like your 2019 Coachmen Adrenaline 25qb do make it interesting when picking out a weight distribution system since the "toys" are carried behind the rear axle which would make the tongue weight lighter actually. But with a full…

If you're looking to tow your Jayco Eagle HT with your 2020 Ram 2500 using the Equal-i-zer Weight Distribution System w/ 4-Point Sway Control, part #EQ37140ET, then we have a shank to make it work with your 2-1/2" receiver. Though the…

For the Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4" #C12172, there really isn't a solution other than to use a torque wrench. Without torqing the necessary bolts to the manufacturer specs, you void the warranty and can have…

Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…

Based on the pictures you attached (thank you!) it looks like you have the Equal-i-zer Weight Distribution Shank #EQ90-02-4100 that allows for a drop of up to 3 inches from the top of the hitch receiver opening. The adjustment portion of the shank…

I wouldn't recommend using the Replacement Shank for Gen-Y Adjustable Ball Mount #325-GH-305 with a weight distribution system. Since you'd be adding basically a hitch adapter to the setup you'd be cutting the capacity of the hitch in…

There would be no way to use the Gen-Y Glyder Shock Absorbing Ball Mounts with a weight distribution system but not to worry, Gen-Y does offer the Gen-Y Torsion Weight Distribution Shanks like part #GY54FR which have built-in cushioning and are…

The Gen-Y Torsion 2-Ball Mount part #325-GH-1024 is a great heavy duty ball mount option for towing. If you have a weight distribution system then there is another version of this same shank that is designed to accept a weight distribution head, the…