Tow Dolly For 2004 Mini Cooper With Front Wheel Drive

Question

Question:

I have read your article stating that it is possible to flat tow a 2004 Mini Cooper S with manual transmission. What if the vehicle is front wheel drive? Does that change your opinion. Thank you for your help.

asked by: Kevin B

0

Expert Reply:

According to page 129 of the online owner's manual I looked up for a 2004 Mini Cooper, if it has front wheel drive, it cannot be flat towed as it will damage the transmission, so you will need a tow dolly. The best option for that is from Roadmaster:

- Roadmaster Tow Dolly with Electric Brakes # RM-2050-1

The Roadmaster dolly will allow you to tow your Mini and is the best option because it allows for the tightest maneuverability for a dolly, and because its electric brakes give you complete control over your stopping power. I have added links below to video reviews for you to check out as well.

expert reply by: Kyle S

0

Answer 1

Please check the owner manuals or contact the manufacturers and ensure that your 2004 Mini Cooper can be towed, and make sure that the vehicle that you are planning to tow this car with can tow it. According to my research I have found that the 2004…

view full answer...

Answer 2

I took a look at the online owner's manual for the 2013 Mini Clubman and it does state that the manual transmission model can be flat towed with all 4 wheels on the ground. I do recommend verifying this information in your copy of the owner's…

view full answer...

Answer 3

Since we do not offer flat towing base plates for your 2007 Mitsubishi Eclipse your towing options are then to use a car hauler type trailer that keeps the entire vehicle off the ground, or potentially to use a towing dolly that supports the…

view full answer...

Answer 4

Hello, sorry for any confusion. For determining the proper size Solera Slider your project requires you need to measure the total width of your slide room from the outside including the flange then add a minimum of 5" (2-1/2" each for the…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

I would be happy to! To flat tow your 2024 GMC Canyon Denali you will need the following parts: Tow Bar and Safety Chains - Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights item #RM-676 Base Plate Kit - Roadmaster Direct-Connect Base Plate Kit…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...