Rubber Hollow Bulb Seal for RV Slide Out - Press On - 25' Long x 7/8" Wide

Video Transcript for Review of etrailer RV Slide Out Parts - Press On Rubber Hollow Bulb Seal 25 Foot - CS65VR

Hi, everybody, Andy here with etrailer.com and today, we're gonna take a look at this etrailer Press-On Rubber Hollow Bulb Seal for RV Slide Outs. With this push-on rubber seal, you are going to be able to replace your old and worn-out bulb seal on your RV slide out before water damage creates a costly headache for you. This flexible steel core is going to help this seal maintain its grip in rounded areas. The steel core is completely encased in rubber to prevent rust formation. So right here where this has been trimmed, you can see a little bit of that steel core, but as that runs through the entire length of the seal, it is completely encased in rubber. So again, you're not going to have to worry about that rust formation.

This is going to be an easy installation. You're just going to press this lip seal onto the 1/8-of-an-inch-thick flange on your RV slide out. You may have to use a rubber mallet to tap the seal in and then you're just going to use scissors to trim any extra that you don't need. This is made here in the USA of EPDM rubber so it won't shrink or crack or fade over time and this is also UV-resistant. Now, the dimensions, looking at the height first, I measured this at almost an inch tall, probably more specifically 15/16 of an inch tall, and then the width, we're sitting pretty close to 7/8 of an inch wide and what I have here on my table is a 15-foot-long bundle, but we do also carry this in a 25-foot and a 50-foot-long bundle as well.

So whichever length is going to work best for you on your screen, you see the item numbers there for the different lengths. So you can just choose the item number of the length that's going to best fit your application and put it in the search field of our website and that will take you to the length that you are looking for. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.

Thank you for joining me.