Dimensions Of Draw-Tite Trailer Hitch Receiver 24966 For 2021 Toyota Prius Prime

Question

Question:

Can you send me some actual measurements? I ask because I had purchased and installed 80 a Curt hitch that was specified for the 2021 Prius Prime Curt part #11473 and found the receiver to be about 1inch too high and 3inch forward of the rear surface of the fascia. I would like to know the vertical difference from the lower mounting bolts to the top of the receiver, and the horizontal offset from the mounting surface to the receiver opening. Thank you

asked by: John H

0

Expert Reply:

I had our warehouse measure the Draw-Tite Trailer Hitch Receiver # 24966 you were looking at and from the center of the lower mounting holes to the top of the receiver measures 3", and from the back of the mounting flanges to the front of the receiver measures 9-7/8" as shown in the included diagrams.

This will fit pretty much the same as the hitch shown in your picture.

I included a picture of the # 24966 installed on a similar 2017 Toyota Prius Prime, and a video of it being installed for you to take a look at.

expert reply by: Samuel C

0

Dimensions Of # 24966
(click to enlarge)

# 24966 Installed On 2017 Toyota Prius Prime
(click to enlarge)

Customer Picture
(click to enlarge)

Answer 1

In general it seems the Curt hitches have the best finish to fight corrosion so for your 2020 Toyota Prius I would recommend the #C11473. For a ball mount for Class I hitches like this you need to go with the recommended one by the manufacturer so…

view full answer...

Answer 2

Thanks for your purchases, they are appreciated, and we do have a 2 inch hitch for your 2018 Toyota Prius Prime, which is the EcoHitch Stealth Trailer Hitch Receiver #306-X7369. While the manufacturer, TorkLift, doesn't offer online PDFs for some…

view full answer...

Answer 3

Though we haven't had a chance to install the Curt Trailer Hitch #C11473 on a 2017 Toyota Prius Prime, based on my research it will sit at about the same spot as the Draw-Tite Trailer Hitch #24966 on your Prius, which is approximately 7"…

view full answer...

Answer 4

It's not by much but the Draw Tite hitch #24966 for your 2018 Toyota Prius weighs the least at 21 lbs whereas the Curt #C11473 weighs 23. I really like the look of the Draw Tite as only the hitch opening hangs below the rear bumper. I know some…

view full answer...

Answer 5

Yakima bike racks such as the RidgeBack do not fit Class I trailer hitches (with few exceptions). The issue is that on most Class I trailer hitches there is a stop punched into the receiver so that Class II accessories cannot be used thus helping to…

view full answer...

Answer 6

The biggest advantage the trailer hitch receivers with a hidden crosstube have is the aesthetic, as they are otherwise very similar. A lot of people don't like having the crosstube visible so they choose the Curt Trailer Hitch Receiver #C11473 or…

view full answer...

Answer 7

I am not sure how much you are looking to spend but bike racks that are capable of handling the weight of two electric bikes are not going to be cheap because they must be built much stronger. However, we do have an excellent option for you in the…

view full answer...

Answer 8

The Curt hitch part #C11473 is a great hitch option for your 2020 Toyota Prius. It's mostly hidden to so it's easier on the eyes and doesn't affect ground clearance as much. I attached an install video for more info as well.

view full answer...

Answer 9

The Thule DoubleTrack Pro Xt part #TH92BJ is a great choice for the hitch of both of your vehicles. This rack can tilt down with bikes loaded and also can have the main mast of the rack fold down when not loaded with bikes. This fits both hitch sizes…

view full answer...

Answer 10

I attached an install video for the Draw Tite hitch part #24966 on a similar Toyota Prius Prime to your 2021 model for you to check out. The process would be the exact same.

view full answer...

Answer 11

For your 2022 Toyota Prius we have the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C11473. This hitch receiver features a fully welded, gloss powder coated steel construction. It has a maximum tongue weight of 200lbs to haul…

view full answer...

Answer 12

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...