1-1/4 Inch EcoHitch InvisiHitch for 2015 Subaru Impreza

Question

Question:

Hello - I see this product 2015 Subaru Impreza - EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2 offered for sale elsewhere online with a 1-1/4inch receiver as well as the 2inch size, the latter apparently being the only size you sell. Id prefer the 1-1/4inch size - it it available through etrailer.com? Id like to buy it through you guys if I can... Thanks!

asked by: Matt

0

Expert Reply:

We do indeed offer the EcoHitch X7212, which we offer as part # EH22RR which is compatible with the 5 door wagon Impreza models with a single exhaust and the knockout panel on the rear bumper face.

If you'll be using the hitch for light duty towing, you'll also need a trailer wiring harness like # 118573, a ball mount like # 3592 and # 19256 for a 1-7/8 or # 19258 for a 2 inch trailer ball.

expert reply by: Mike L

0

Answer 1

On the Curt Class I Trailer Hitch #C11286, the distance from the center of the hitch pin hole to the forward end of the receiver tube is 5 inches. I spoke with my contact at Curt and confirmed this measurement. I have attached a photo showing the…

view full answer...

Answer 2

The strap they're referring to is #18050. One end of the strap would loop around the upright of the bike rack, the other would clip into the seam between the hatch and the vehicle roof. I've linked you to a video showing how that…

view full answer...

Answer 3

Although we haven't had a chance to test fit and shoot a video of the the Draw-Tite Sportframe Trailer Hitch Receiver #DT24959 on a 2017 Subaru Impreza, I was able to go to the warehouse and get some measurements for you. From the top of the…

view full answer...

Answer 4

The correct hitch for your 2016 Subaru Impreza Wagon from EcoHitch is the part #306-X7211. Best option would be to return the hitch you have and go with this one.

view full answer...

Answer 5

We carry one 2 inch trailer hitch receiver to fit your 2015 Subaru Impreza, the EcoHitch, part #306-X7211. However, it only fits if your vehicle has the knock out panel on the rear bumper. If your Impreza doesn't have a knock out panel then…

view full answer...

Answer 6

The correct EcoHitch Trailer Hitch Receiver for a 2012 Subaru Impreza Hatchback is part #306-X7211 just be sure you have the center knock-out panel in the rear bumper fascia. The hatchback and wagon are the same for all intents and purposes regarding…

view full answer...

Answer 7

Yes, the EcoHitch Invisi Trailer Hitch Receiver #306-X7211 is confirmed to fit your 5 door 2013 Subaru Impreza Sport Hatchback that has the single exhaust tube. Your Impreza must have the knockout panel in the center or the lower rear fascia to use…

view full answer...

Answer 8

For your 2016 Subaru Impreza we only have one 2 inch trailer hitch and that is the EcoHitch part #306-X7211 that you referenced.

view full answer...

Answer 9

The EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2" #306-X7211 is a confirmed fit for your 2016 Subaru Impreza Wagon as long as it has single exhaust and the center knock-out panel in the lower rear fascia you have pictured.…

view full answer...

Answer 10

If your 2013 Subaru Impreza has a single exhaust that has a knock out panel located in the fascia under the rear bumper, the EcoHitch #306-X7211 will fit your vehicle. As you can see in the provided photos, the receiver tube will actually sit behind…

view full answer...

Answer 11

I checked the Lippert Turning Point manual and below attached the maintenance recommendations. No mention of needing to lube the hitch plate is listed so you really don't need to lube that area. If you insisted on doing so a graphite lube like…

view full answer...

1-1/4 Inch EcoHitch InvisiHitch for 2015 Subaru Impreza

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching