Can Jack MJ-1500B Replace Shelby Jack
Question:
I am also trying to replace a Shelby and this looks like a good jack. My question is whether the MJ-1500B will fit on the center bolt in the the welded on Shelby bracket. If yes, this is a done deal for me. Thank you for your help. The trailer the jack is going on is Tennessee I purchased around 2008 and it is under a Tracker Super Guide V-16 1996.
asked by: Bill S
Helpful Expert Reply:
The Round Swivel Marine Jack # MJ-1500B won't connect to the weld-on bracket of a Shelby jack; that said, you can still use it. This is a bolt-on jack, so as long as you have 6-7/8 inches of space somewhere on your trailer's frame (and its frame is between 2 inches and 4 inches tall), the jack will still fit.
You will just use the mounting brackets and attach it directly to your trailer frame without any welding or drilling needed.
I have added a link below to a video review for you to check out as well of the Round Swivel Marine Jack # MJ-1500B.
Product Page this Question was Asked From
etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 11" Lift - Zinc - 1.5K
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 11 Inch Lift
- Bolt-On
- With Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Shop: Fulton Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 10" Lift - Zinc - 1.2K
- Shop: Replacement Bolt-On Mounting Kit for Fulton XP Series Jacks
- Video: Review of Fulton Trailer Jack - Side Frame Mount Jack - FXP10W0301
- Video: Fulton Trailer Jack - Side Frame Mount Jack - FXP10 Review
- Shop: etrailer Boat Trailer Jack w/ Wheel - Sidewind - Swivel - 11" Lift - Zinc - 1.2K
- Video: Review of Dutton-Lainson Swivel Plate Kit For 2 Bolt Pivot Trailer Jacks - DL22426
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Replacement Bolt-Thru Jack for a Shelby 5784 Jack
- Shop: Vehicle Seat Covers
- Shop: Replacement Mounting Kit for etrailer and Ram Swivel Marine Jacks - 1,200 lbs and 1,500 lbs
- Shop: Fulton Adapter Kit - Weld-On XP Jack Mount to F2 Swing-Up Trailer Jack for 3" x 4" Frames
- Shop: 2-Bolt Swivel Mounting Plate for 1,000-lb Trailer Jacks with a 1/2" Swivel Pin
- Q&A: How Tight Should Shackle Straps and Bolts Be Tightened On Trailer
- Q&A: How Tight Should Shackle Bolts Be Tightened On Trailer
- Video: etrailer Round Swivel Marine Jack with Wheel Review MJ-1500B
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Video: Review of Fulton Replacement Bevel Gear Kit Marine Recreational Jack - F0933302S00
- Q&A: Recommended Replacement Jack for Shelby Trailer Jack
- Q&A: Will Fulton Jack be a Replacement for Shelby Jack 5776
- Q&A: Trailer Jack to Replace 1200-lb-Rated Shelby 5791
- Q&A: Fulton Swivel Jack Compatibility With Shelby Jack Welded Plate
- Video: etrailer Trailer Jack - Side Frame Mount Jack - MJ-1200B Review
- Shop: Trailer Hitch
- Video: Choosing the Right Brake Controller
- Search Results: 25580
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Search Results: 44649
on Trailer Jack
