5th Wheel Landing Gear Replacement for 2011 Wildcat by Forest River Model 31TS

Question

Question:

Thank you sir. Will the electric motor bolt up to it?

asked by: Daniel M

1

Helpful Expert Reply:

You could use the Landing Gear part # RVLG-8HDL as a replacement for what you have now on our 2011 Wildcat by Forest River. This will bolt right up in place of what you have and has plenty of capacity at 8,000 lbs so it will operate easily.

expert reply by: Jameson C

1

Daniel M.

6/17/2021

Thank you sir. Will the electric motor bolt up to it?

Reply

Jameson C.

6/17/2021

Since you are wanting a powered set you'd instead want the part # LG-4 as your current motor would not bolt up to the other kit mentioned most likely.

Reply

Answer 1

The only difference between the two landing gear sets you referenced is that Landing Gear #RVLG-8HDL comes with a handle and #RVLG-8000 does not. Apart from that they are the exact same landing gear sets, with 20-1/2" of travel, an 8,000 lb…

view full answer...

Answer 2

Based on the picture of your landing gear it looks like you have Ram jacks on your 2015 Heartland Elkridge E275 which would mean the correct replacement quick pin kit would be the part #RVLG-SPP. That said yours look like they could just be gunked up…

view full answer...

Answer 3

I would be happy to help you. I don't have any way of knowing what type of landing gear you have on your 2010 Forrest River 5th Wheel to possibly find a matching replacement leg. Since you are ok replacing both front legs and have weld stops at…

view full answer...

Answer 4

The etrailer Landing Gear Set, part #RVLG-8000 can be used to replace the landing gear set you have on your 2007 Montana. The hand crank is available as a separate item and is part #RVLG-HDL. Most landing gears are interchangeable but you can take a…

view full answer...

Answer 5

If the brand of landing gear you have now on your Keystone Laredo is a Ram brand then yes you could reuse it's motor with the #RVLG-8HDL. But most likely you have a Lippert set of landing gear based on what typically they used so instead the part…

view full answer...

Answer 6

If the landing gear on your 2010 Keystone Xlite is Ram jack brand landing gear then yes the #RVLG-8HDL would fit and your current motor part #M1230 would work as well. If you instead have the brand LCI, Lippert, Venture, or Stromberg you'd need…

view full answer...

Answer 7

If you're able to provide a bit more information about your current landing gear setup on your 2010 Forest River Wildcat, I would be happy to see if we have a rebuild kit or a replacement leg for your landing gear, however without that…

view full answer...

Answer 8

We do not sell that specific piece you reference, however we do sell #LC179014 which replaces the leg and snap pin. You would need to make sure that the measurements match up with your current leg and the weight capacity is appropriate. As far as…

view full answer...

Answer 9

I believe we may have what you are looking for, but to answer your question the Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear #RVLG-SPP is designed for Landing Gear Set #RVLG-8000 which has a 2-1/2" square leg and a…

view full answer...

Answer 10

Yes. You can use Stromberg Carlson Manual Landing Gear Set - 34-7/8" Lift - 8,000 lbs Item #LG-183708 in place of the Lippert set that you have now. Or you can use Lippert set #LC333964 for an electric set or #LC333966 for a manual set. Or you…

view full answer...

Answer 11

Yes, based on the distance between the welded on brackets of your camper the etrailer landing gear set part #RVLG-8HDL will fit on your 2021 Forest River Cherokee Wolf Pack. The motor normally used with this kit is the part #LC142178. If the motor…

view full answer...

Answer 12

I may have a solution for you, but I wasn't able to find any specs regarding your Atwood landing gear. With that said, the Spring-Loaded Pull Pin for etrailer and Ram 5th Wheel Landing Gear #RVLG-SPP is designed for Landing Gear Set #RVLG-8000…

view full answer...

5th Wheel Landing Gear Replacement for 2011 Wildcat by Forest River Model 31TS

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching