I Need a Battery To Operate The Jacks On My Slide In Truck Camper  

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

I have a complete replacement camera system option for you, but since your current camera system is no longer made there are no replacement cameras available that use your same monitor. I recommend replacing it with the Voyager WiSight 2.0 Wireless…

That's weird, the 7-Way Vehicle Power Adapter for Furrion RV Observation Camera #FR87PR should allow you to use your camper at the same time as that's what it's designed for. If you want to just avoid the adapter all together, I would…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

For a replacement I would check the size of what you currently have and match it. AGM is perfectly fine to use and won't require swapping out your converter/inverter since it uses the same charge profile as lead acid. An upgrade is typically…

I reached out to Lippert and found that the correct replacement for your Power Gear Slide out motor 524065 is the Replacement Slide Gear Motor Assembly for Power Gear Slides #LC387738. Thank you for the pictures, it makes it way easier to find the…

The correct bearing kit you need for a Dexter 3,500 lb axle is the part #BK2-100 which comes with the bearings, races, and seal needed plus a tang washer and cotter pin.

Yes, we can help you get this product. That part is the Replacement Gear Motor w/ MX2 Con. For Lippert Slide Out part #LC88UD, is the part you need for your 2009 Jayco Seneca Motorhome. . I have included a product description below.

The part number on your Power Gear Slide-Out motor is actually 524908, for which the correct replacement is part #LC368200. I was able to confirm this with Lippert.

The bearing kit part #BK2-100 is a kit designed specifically for 3,500 lb axles like what your trailer has. This will work well for your trailer and comes with all of the needed bearings, races and seal. I attached an install video for this kit for…

The Jensen RV Stereo part #JWM60A is not a plug and play replacement for the Concertone RV Stereo ZX75 as they are made by two different manufactures. However, it will be easy to replace this as all you will have to do is splice the new wiring…