Titan Hitch Box Extension RP45292 Fits into a Hitch with a 2-1/2 Opening

Question

Question:

will your product work on a 1999 f-350 stardard tow package?

asked by: Derek

0

Expert Reply:

The Titan Hitch Box Extension, part # RP45292, fits into a hitch with a 2-1/2 inch opening. If the hitch on your Ford F-350 has a hitch with a 2-1/2 inch opening, this extension is compatible with your tow package.

expert reply by: Andi

0

Answer 1

If I did the math right the combined weight of the trailer and the vehicle is 5,300 pounds. At the 24 inch length the Hitch Box Extension and Reducer for Titan 2-1/2" Trailer Hitches, 24" - 34" Long Item #RP45292 is rated…

view full answer...

Answer 2

Since you have a 2-1/2 inch hitch and need an extension for a weight distribution setup on your trailer you would want the #RP45292 as it is designed for use in a 2-1/2 inch hitch and can be used with weight distribution systems. You would need to…

view full answer...

Answer 3

I went ahead and reached out to Torklift, and they confirmed what you need to in order to remove the gas tank cover on your vehicle to install the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front #TLF2016. The cover drops down and gives you…

view full answer...

Answer 4

The Torklift camper tie downs you are looking for are the part numbers #TLF2016 and #TLF3006. We had the TL to the beginning of the part number for "TorkLift". These are a fit for your 2016 Ford F-250.

view full answer...

Answer 5

It sounds like your 2012 Ford F-350 Super Duty has a factory hitch and running boards that stop at the cab so you don't have any boards or steps under your truck bed. If this is the case then here are the TorkLift tie-downs you need for…

view full answer...

Answer 6

The correct TorkLift Custom Frame-Mounted Camper Tie-Downs for a 2015 Ford F-350 Super Crew with no running boards and a factory hitch is part #TLF2016 for the front and part #TLF3006 for the rear. In regards to SRW vs DRW, this does not matter and…

view full answer...

Answer 7

The Reese Hitch Box Extension you mentioned, part #RP45292 can be cut down to 24 inches long. At that length, it would have a 8000 capacity when used with a weight distribution system. You'd need to use the extension with a Class V hitch with a…

view full answer...

Answer 8

I spoke with my contact at Reese and as long as you are using the Titan Hitch Box Extension for 2-1/2 inch Trailer Hitches, item # RP45292, at the 24 inch extension length, there are no stabilization chains or cables required. Since your trailer is…

view full answer...

Answer 9

Using the hitch extension will reduce the tongue weight capacity of the trailer by 50 percent. But if you have a 2 1/2 inch trailer hitch receiver and use the Titan hitch extension #RP45292 the tongue weight capacity will not be reduced. At the 24…

view full answer...

Answer 10

There is a Titan hitch extender that should work for you, but would require a Titan hitch be installed on your truck to handle a tongue weight loaded that far from the hitch. It is Reese part #RP45292. You can use it as a 34 inch extension or cut it…

view full answer...

Answer 11

The only hitch extension we offer that is compatible with weight distribution hitches is the Titan Hitch Box Extension and Reducer #RP45292. This product is designed to fit hitches with a 2-1/2 inch receiver opening and then reduces down to a 2 inch…

view full answer...

Answer 12

Using the hitch extender will reduce the tongue weight capacity of the trailer by 50 percent. But if you have a 2 1/2 inch trailer hitch receiver and use the Titan hitch extension #RP45292 the tongue weight capacity will not be reduced. If you do not…

view full answer...

Titan Hitch Box Extension RP45292 Fits into a Hitch with a 2-1/2 Opening

Product Page this Question was Asked From

Continue Researching