Hitch Extension Recommendation for Use With Weight Distribution

Question

Question:

I need a hitch extension that i still can use my weight dispersment. I would like it to be 18inch long but i can go as low as 14. I am towing a 30 foot travel trailer. What do you recomend

asked by: Jim N

0

Expert Reply:

The only hitch extension we offer that is compatible with weight distribution hitches is the Titan Hitch Box Extension and Reducer # RP45292. This product is designed to fit hitches with a 2-1/2 inch receiver opening and then reduces down to a 2 inch hitch opening. This means you will need a hitch with a 2-1/2 inch opening and a weight distribution system designed for a 2 inch opening. Without knowing what vehicle you have I cannot recommend a hitch, but I did attach a page that has all of the weight distribution systems we offer designed to fit 2 inch hitches.

This extension can be used in a 24 inch or 34 inch configuration. In the 24 inch length has a rating 8,000 lbs total trailer weight.

expert reply by: Jameson C

0

Gary P.

7/6/2020

Is this still the only hitch extension for weight distribution and sway control hitch? I have a 2" receiver and need 6 to 12 inches for the more clearance so the tow vehicle tailgate will clear the Jack when opened.

Reply

Chris R.

7/10/2020

Yes, standard hitch extenders just aren't rated for the type of force that a weight distribution system puts on the connection. A potential solution is with a longer WD shank. The Curt # C17122 has an extended shank that provides 14" of length between the hitch pin hole and adjustment holes.

Reply

Answer 1

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 2

Weight distribution works to distribute the tongue weight of a trailer up to the front axle of the tow vehicle so that it will sit more level and handle/brake better. That being said the systems do not "reduce" tongue weight or…

view full answer...

Answer 3

A hitch extender or adapter, like the dual-receiver MT70070, cannot be used with weight distribution (WD) systems. As you note, use of ANY adapter has the unavoidable side-effect of cutting your hitch's capacity by 50-percent. An adapter would…

view full answer...

Answer 4

For your situation, I cannot recommend you use a hitch extender like #ST18 and a longer weight distribution shank, but I do have a couple solutions for you. A hitch extender like #ST18, will not be able to support the weight of your trailer and…

view full answer...

Answer 5

When choosing the slider you want to measure the outside front of box width including the flange. Then you need to select a slider that extends a minimum of 2-1/2 inches beyond each side of the box width. For example, the Black Solera Slider…

view full answer...

Answer 6

With weight distribution systems you can't really make tight turns while backing up. What we recommend is that if you are basically backing up in a straight line you can leave the spring bars on the system. But if you think you will end up…

view full answer...

Answer 7

There is one extender that will work with the 3 inch factory hitch on your 2017 Ford F-350 Super Duty, the TorkLift Cannon Hitch Extension, and it comes in three different lengths: 36" Long #TLE1636, 42" Long #TLE1642 and 48" Long…

view full answer...

Answer 8

Using a hitch extender is safe as long as you stay within the limits specified of 50 percent of the hitch and vehicle load capacity, and 350 lb tongue weight capacity of part #HE06. The other option to provide additional clearance from your spare…

view full answer...

Answer 9

Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball mount…

view full answer...

Answer 10

Going out further than the overhang of the camper wouldn't be helpful and would only potentially add more leverage on the truck's hitch. Since your 2020 Ford Superduty has a camper than extends out past the rear of the truck 36 inches the…

view full answer...

Answer 11

I checked with Torklift and they informed me that the Cannon #TLE1636 is made of 2 different tubes that overlap. One of them has a wall thickness of .25 and the other is .21. One tube fits inside of the other so the wall thickness is different at…

view full answer...

Answer 12

I am a bit confused, because I was under the impression that Ford didn't begin offering the 3 inch hitch until the 2017 model year. As long as the hitch on your 2016 Ford truck is the 3 inch factory receiver, the Torklift #TLE1636 will be…

view full answer...

Hitch Extension Recommendation for Use With Weight Distribution

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching