2003 E-350 Front And Rear Anti-Sway Bar Recommendations

Question

Question:

Please provide the correct part numbers so that I order the correct equipment for my ambulance. It has a 7.3 liter diesel engine, auto transmission, Dana 60 rear axle. I am pulling a 34foot travel trailer with it and I am trying make it a competent two vehicle as it likes to wander with the wind in spite of my load distribution hitch with sway control.

asked by: Todd G

0

Expert Reply:

For your vehicle the I recommend the Roadmaster Front Anti-Sway Bar Item # RM-1139-115 and the Roadmaster Rear Anti-Sway Bar Item # 1139-178. I verified your VIN number with Roadmaster to ensure these were a confirmed fit.

expert reply by: Kevin C

0

Answer 1

Roadmaster offers an anti-sway bar that is confirmed to fit your 2004 Ford E350 cutaway box van. You would want the Roadmaster Sway Bar part #RM-1139-117. If you wanted a front sway bar you would want the Roadmaster Front Anti-Sway Bar #RM-1139-115.…

view full answer...

Answer 2

For a 2002 Ford E350 Class-C RV, the correct rear stabilizer kit is Roadmaster #RM-1139-117 which will definitely help with cross winds and passing vehicles. If you decide you would like more stability you could additionally add the Roadmaster…

view full answer...

Answer 3

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 4

We do have the Rhino-Rack Masterkey Lock Barrels #RRRK093-2 which will provide you with 2 new lock cores and keys for your Rhino-Rack Zenith MasterFit Rooftop Cargo Box #RRRMFZ66. As far as pricing goes on the different sets they can change based on…

view full answer...

Answer 5

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 6

The best option we offer for your dump trailer is the Erickson Mesh Tarp and Truck Bed Cover part #EM57059 which measures 12' wide x 16' long. It's not the exact dimensions you wanted but it will still cover most of the area you need it…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…

view full answer...

Answer 9

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Answer 10

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 11

Hey David, actually what is going to make the biggest improvement in handling and stability for your 2011 Itasca is an upgraded rear sway bar with the part #RM-1139-175. I know that's not what you asked about but for motorhomes where most of the…

view full answer...

Answer 12

There is a suspension enhancement option for your 2021 Entegra Vision XL built on a Ford F-53 chassis, but I verified with the manufacturer that the steering stabilizer only fits if you have at least a 24,000 lb GVWR. You're not out of luck…

view full answer...