How to Pick Out Replacement Hub for 2002 Triton Snowmobile Trailer
Question:
Looking for a Hub for a 2002 Triton Snowmobile Trailer..I can not find Triton as a brand when looking up on Your list you offer Thanks
asked by: Bill
Expert Reply:
In order to pick out the correct hub assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. This is so you get a hub that is compatible with your wheels. I attached an FAQ article on determining bolt pattern for you to check out.
Next thing you will need to know is what spindle you have on your trailer. In order to do that you can either get the inner and outer bearing numbers from a hub or use a dial or digital caliper to get exact measurements of the spindle. The measurements needed are the parts of the spindle where the bearings ride.
If you get back to me with that information I will help you pick out the right hub assemblies. Or, you can follow the link I attached that will take you to the page that has all of our replacement hubs.
You would want to first select the bolt pattern that you have, next select the inner bearing you have, followed by selecting your outer bearing, and then all the correct hubs will be listed.
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: etrailer Trailer Idler Hub Assembly Installation
- Shop: Easy Grease Trailer Idler Hub Assembly for 3.5K Axles - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 10" to 12"- 5 on 4-1/2 - Pre-Greased
- Search Results: triton trailer bearings
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Grease Cap, 1.99" OD EZ Lube Drive in with Plug - Qty 2
- Shop: Replacement Spindle Washer - Tang Type for E-Z Lube
- Q&A: How to Determine Which Replacement Wheel Bearings and Grease Seals are Needed for Trailer Hubs
- Shop: Trailer Idler Hub Assembly for 2,500-lb Axles - 5 on 4-1/2 - Qty 2
- Q&A: How to Pick Out Replacement Bearings/Bearing Kit for 2004 Triton XLT
- Q&A: What Hub will Fit My BTR Spindle and is Compatible with an 8-Inch Wheel?
- Q&A: Replacement Hub for Triton Snowmobile Trailer
- Search Results: bearing buddy
- Article: Most Popular Wheel Bearings
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: l44649
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Shop: Brake Controller
- Search Results: lug nut
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Trailer Tire Sizing
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: 25580
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Shop: Suspension Enhancement
- Video: etrailer Trailer Idler Hub Assembly Review and Installation