Recommended Roof Rack And Kayak Carrier For 2011 Toyota Corolla

Question

Question:

I am looking to transport a Hobie Outback, about 85lbs on a bare roof of a 2011 Toyota Corolla S model with sunroof. Is this compatible, and if so what size? Also, is it approved for a roof with a sunroof? Will I also need foam pads, or a foam mount with straps?

asked by: Shelly K

0

Expert Reply:

The Rhino-Rack Vortex Aero Crossbars - 46" # RRVA118B-2 would work well for carrying a kayak on your 2011 Toyota Corolla. You'll also need the corresponding Legs # RRRLKVA and Fit Kit # DK152. This will allow you to use the slide-open feature of the sunroof, but I cannot say with certainty if it will allow you to tilt open the sunroof or not as that could possibly cause some interference; Rhino-Rack was also not able to confirm compatibility with the tilt feature.

You will want to add a kayak carrier to not only secure the kayak safely to the crossbars, but also protect the kayak from getting damaged or even damaging the roof rack. I think the best kayak carrier for your application is Rightline Gear Kayak Carrier 14-3/4" # RL100K10. This uses 14-3/4" foam blocks and included tie-downs to secure your kayak to the crossbars. I think this is the most economical option for you to safely carry your kayak on your vehicle's roof. I attached a demonstration video for this carrier.

expert reply by: Andrew N

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

Tracks can absolutely be installed on the roof of your A.R.E. Truck Cap to provide a mounting system for a roof rack. For this I recommend the Yakima Tracks, which come in 42 inch #Y01126, 54 inch #Y01127, and 60 inch #Y01135 lengths. These tracks…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 8

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 12

Hey Alex, it sounds like you are looking for just the tracks of the Rhino Rack camper shell roof rack kit #Y02-480B which we do offer with the part #RTC16.

view full answer...

Recommended Roof Rack And Kayak Carrier For 2011 Toyota Corolla

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching