Availability Of Replacement Circuit Breaker For Bulldog Powered Driver 3500lb Trailer Jack BD500187

Question

Question:

I am in need of a micro switch for this model Bulldog Jack. I can not find anywhere a parts breakdown on a model 500187 so I would know the part number. Can someone please contact me as my jack will not work without this micro switch. Thanks,

asked by: Tim V

0

Expert Reply:

We sure do!

That is actually the circuit breaker of your Bulldog 3500lb Trailer Jack # BD500187. For a replacement you will need the Tekonsha 30 Amp Circuit Breaker # 7012A which my contact at Bulldog confirmed.

I included a video of the # BD500187 for you to take a look at.

expert reply by: Samuel C

0

Customer Circuit Breaker
(click to enlarge)

Answer 1

We sure do! You'll need part #BD500363 which is the replacement Retract/Extend rocker switch for the Bulldog #BD500187 powered A-Frame trailer jack. We also offer the replacement light switch as part #BD500362

view full answer...

Answer 2

The correct extend and retract switch for the Bulldog Powered Drive Trailer Jack #BD500187 is part #BD500363. If you're needing the light switch then you'll want part #BD500362. If your cover is messed up as well you can replace all…

view full answer...

Answer 3

I attached pictures that show how the switches of the Bulldog Powered Jack #BD500187 get wired.

view full answer...

Answer 4

The Bulldog Powered-Drive Trailer Jack part #BD500187 has a built-in auto resetting circuit breaker. There isn't a reset procedure for this, since the breaker is thermally operated it will allow power to pass though once the temperature has…

view full answer...

Answer 5

The Bulldog Powered-Drive Trailer Jack, item #BD500200, only has one wire, the power wire. This jack attaches to ground through the mounting hardware and the trailer frame. When wiring the jack to your 7-Way trailer connector you will need to make…

view full answer...

Answer 6

Usually when this occurs, it's because the jack has been over extended; there is a small lock nut in the channel on the inner tube of this jack that if it's over extended will cut into the V channel on the inside. When this happens,…

view full answer...

Answer 7

The Bulldog Powered Drive Trailer Jack part #BD500199 comes with an internal circuit breaker so there should not be a in-line fuse holder on the black wire from the jack unless someone added it during installation or before you purchased the jack…

view full answer...

Answer 8

When wiring up the Bulldog A-frame trailer jack #BD500187 you can use 12 gauge wire such as #12-1-1 (sold by the foot) as long as the distance from the jack to the battery is less than 20 feet. I am assuming that the battery is located at the front…

view full answer...

Answer 9

I spoke with my contact at Bulldog about the problem you are having with your Bulldog Powered-Drive Trailer Jack #BD500187. He said it is likely that the problem is with connection for the ground wires in the jack. To check your ground connection,…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 12

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Availability Of Replacement Circuit Breaker For Bulldog Powered Driver 3500lb Trailer Jack BD500187

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching