bing tracking image
Q & A Icon

No Power To Furrion Vision S Camera  

Question:

I hooked up the furrion vision s with the 4.3inch camera and im not getting any power to the camera. Ive already synched them in the cab of the truck and nothing in the back. Also, I did have my lights on the truck on. The lights on the trailer are on and working and the power indicator light still isnt lighting up. What is my problem?

0

Expert Reply:

You are not getting any power to the Furrion # FOS43TASF camera on the back of your RV. The power cord to the camera has a round jack connection at the back of the camera and bare wires connection where it connects to a 12 volt source at the back of the trailer. I have attached a picture with this part described. The wires are thin and susceptible to breaking. I would open that connection and measure the voltage and check the connection. If you don't have power you will need to trace this connection back to look for breaks or a bad fuse. If you have power, then you likely have a problem with the camera. Email me back if you need further troubleshooting help.

expert reply by:
0
Les D
Furrion Vision S Camera Power Wire
Furrion Vision S Camera Power Wire
(click to enlarge)

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>