Installing Curt C56434 Trailer Wiring Harness on 2021 Toyota RAV4

Question

Question:

This link does not work. C56434 Curt T-Connector - 4 Wire - Modu-Lite Installation Details 118801 Installation instructions https://www.etrailer.com/instructions.aspx?pn=118801

asked by: Lawrence H

0

Expert Reply:

They're working fine on this end, I'll send you a .pdf copy via email but I'll also link to an install video showing the harness being installed on a 2021 RAV4. You'll likely find this more helpful than the printed instructions anyway.

In a nutshell, to install the harness you'll need to access the harnesses feeding the taillight assemblies. You'll remove the threshold, storage area covers and floor in the cargo area, then loosen and pull back the interior trim panels on either side. Once you have the taillight wiring harness exposed, you'll unplug its connection with the taillight assembly and plug the # C56434 at that connection.

expert reply by: Mike L

0

Answer 1

The trailer hitch that is going to have the best ground clearance and that will be the most hidden for your 2022 Toyota RAV4 will be the EcoHitch Hidden Trailer Hitch Receiver #EH97FR. The EcoHitch has a completely hidden crosstube with only the 2…

view full answer...

Answer 2

The overall weight is 35 lbs of the etrailer Trailer Hitch Receiver #e23ZR. It is made from steel, and there is not an aluminum hitch, or one that weighs dramatically less. All hitches are made from steel or an alloy to ensure the overall strength…

view full answer...

Answer 3

In regards to the Curt Trailer Hitch Receiver part #C89UR which is a fit for a 2021 Toyota Venza you will need a 19mm crowfoot wrench in order to properly torque the hex bolt down on the passenger side. That said, I usually just use a box wrench…

view full answer...

Answer 4

Extending the black power wire to the battery of the 2020 Toyota RAV4 from the Curt T-Connector part #C56434 can be done in a couple of ways. You can route the wire through the frame under the vehicle or route the wire through the vehicle itself. The…

view full answer...

Answer 5

The best option I have to install a 12 volt power outlet in a truck bed would be to use the Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly part #HM55115 and wire this directly to the battery. This would need to be wired directly to…

view full answer...

Answer 6

The wire size of the Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly #HM55115 is 14 gauge and the amperage rating of the fuse is 20 amps. So as long as you stay under 20 amps this product should work well for you.

view full answer...

Answer 7

How you run the power wire for trailer wiring on your 2020 Rav 4 is a personal choice. The directions do not give you a specific path to take, but it does give some suggestions. The wire will have to start at the back of your Rav 4, near the tail…

view full answer...

Answer 8

Since all children's bikes are made differently, I cannot confirm for sure if you need an adapter bar for the SportRack Ridge Swing 4 Bike Rack - 2" Hitches - Swinging #SR2415. However, if the child's bike is similar to the bike in the…

view full answer...

Answer 9

Normally you can find the brake light switch under the dashboard at the top of the brake pedal. There could be a number of wires attached to the switch so you can use a tester like part #PTW2993 to test the wires. Since the auto manufacturers can use…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Installing Curt C56434 Trailer Wiring Harness on 2021 Toyota RAV4

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching