Wire Size and Amperage Rating of the Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly

Question

Question:

What is the wire size and how many amps can it handle safely?

asked by: Bud

0

Expert Reply:

The wire size of the Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly # HM55115 is 14 gauge and the amperage rating of the fuse is 20 amps. So as long as you stay under 20 amps this product should work well for you.

expert reply by: Jameson C

0

Answer 1

The best option I have to install a 12 volt power outlet in a truck bed would be to use the Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly part #HM55115 and wire this directly to the battery. This would need to be wired directly to…

view full answer...

Answer 2

Extending the black power wire to the battery of the 2020 Toyota RAV4 from the Curt T-Connector part #C56434 can be done in a couple of ways. You can route the wire through the frame under the vehicle or route the wire through the vehicle itself.…

view full answer...

Answer 3

They're working fine on this end, I'll send you a .pdf copy via email but I'll also link to an install video showing the harness being installed on a 2021 RAV4. You'll likely find this more helpful than the printed…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

When it comes to choosing between the Blue Ox Patriot #BLU37TR and the Brake Buddy Select 3 #HM39524, these systems are extremely similar in their setup and functionality. Both of these systems provide proportional braking in a compact and easy to…

view full answer...

Answer 7

I attached a picture that shows how much of the etrailer.com hitch part #E98901 would hang below the rear bumper when installed.

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

The Blue Ox Patriot Portable Braking System - Proportional #BLU37TR, uses a 12V powered remote that wirelessly connects to the 12V powered braking unit. This wireless remote has an inertia-based sensor in it that can sense the braking of the towing…

view full answer...

Answer 10

Hey Robert, for your 2016 Jeep Wrangler using the Ready Brute Elite II tow bar you can use the Blue Ox Base Plate Kit #BX1126 with the Blue Ox Base Plate Adapter Brackets for Ready Brute Elite Tow Bars #BX88297. From here, to complete your flat…

view full answer...

Answer 11

Hey there Jeff, thanks for the question and I can definitely get you all the parts needed to flat tow your 2014 Chevy Silverado 1500 behind your motorhome. I'll go ahead and list everything out for you to make it easy to order. - Base Plate Kit:…

view full answer...

Answer 12

In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along with…

view full answer...

Wire Size and Amperage Rating of the Hopkins 12-Volt Power Socket with Power Wire and Fuse Assembly

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching