Recommended Hydraulic 10 Inch Brake Assemblies With Aluminum Brake Cylinders for Boat Trailer
Question:
I want to replace the surge brake system on my Easy loader trailer, twin 3500# axles, with a Atwood actuator that also needs replacing. Boat and trailer weigh about 6300# with fuel. I like the looks of the Dexter DX7.5 Drop-N-Go Brake Actuator as a replacement. The Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10inch - Left/Right Hand - 3,500 lbs Item # AKFBBRK-35 , look like they would work fine. The question I have is are the wheel cylinders aluminum? If not are there assemblies that use aluminum or composite cylinders? I have had problems with cast iron cylinders rusting.
asked by: Greg O
Expert Reply:
The wheel cylinders used on the # AKFBBRK-35 brake assemblies are cast iron so they wouldn't be the best option for a boat trailer. Instead, I'd use # AKFBBRK-35-D which feature Dacromet coated backing plates, aluminum brake cylinders and stainless steel springs for increased corrosion resistance.
The Dexter # 099-175-00 Drop-N-Go brake actuating coupler would be an excellent replacement for your existing Atwood surge coupler.
I've linked to some product description videos for the products recommended above.
Products Referenced in This Question
Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- Drum Brakes
- No Lockout
- Dexter
more information >
Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Hydraulic Trailer Brake Kit - Uni-Servo - Free Backing - 10" - Left/Right Hand - 3,500 lbs
- Trailer Brakes
- Hydraulic Drum Brakes
- Standard Grade
- Free Backing
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Drum Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Kodiak Hydraulic Brake Line Kit - Single Axle - 18'
- Shop: Hopkins Engager Push-To-Test Trailer Breakaway Kit with Built-In Battery Charger - Top Load
- Shop: Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs
- Article: Trailer Wiring Diagrams
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Shop: Bright Way Push-to-Test Trailer Breakaway Kit with 1-Amp Charger and 5 Ah Battery - Top Load
- Shop: Trailer Hitch
- Search Results: 44649
- Video: Stromberg Carlson RV Exterior Ladder with Hinges Installation - 2021 Keystone Passport SL Travel Tra
- Shop: Grease Seals 10-36 (pair)
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: 25580
- Q&A: 05680-C Master Cylinder Replacement for Trailer Recommendation
- Shop: Fifth Wheel Hitch
- Q&A: Recommended Components for Off-Road Trailer Similar to Chevy Colorado Wheels
- Video: Choosing the Right Trailer Wiring
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Search Results: dust cap
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Brake Controller
- Search Results: 15123
- Shop: Gooseneck Hitch
- Video: Brake Buddy Classic 3 Portable Supplemental Braking System Installation - 2009 Jeep Wrangler Unlimit
- Q&A: Is Bow in 3,500 lb Trailer Axle Enough Camber for Loaded and Unloaded Trailers