What Quantity Are Happijack Qwik Load Upgrade Sets Sold In

Question

Question:

do they sell these individual or quanity of 2? I only need 2 but only see them in sets of 4. thank you

asked by: Thomas H

0

Expert Reply:

The HappiJack Qwik Load Upgrade Kits are only sold in quantities of 4 like with the part # LC182894.

expert reply by: Jameson C

0

Answer 1

The equalizers in the kits #K71-652-00 and #K71-654-00 that you referenced are actually the exact same. The only difference between these kits is that the 652 comes with replacement shackle straps while the 654 only comes with the equalizers and no…

view full answer...

Answer 2

The HappiJac Qwik-Load Upgrade Kit for Standard Turnbuckles part #LC182894 is an excellent upgrade option for the HappiJac Original Turnbuckles for Camper Tie-Downs part #LC182898. These are going to cut down dramatically on the time it takes to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 7

Thank you for providing the specs for the suspension components that you already have. Correct hanger spacing really depends on the components being used such as springs, hangers and equalizers. Most of the hanger spacing dimensions that we have are…

view full answer...

Answer 8

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 9

To correctly measure a leaf spring, you'll want to jack the trailer up on jack stands so the axle is hanging freely, then measure directly across from the center of one spring eye to the other, as shown in the provided diagram. The height of the…

view full answer...

Answer 10

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 11

The Hellwig Adjustable Big Wig Rear Anti-Sway Bar #HE94FR is only going to leave a few inches between it and the spare tire, as you can see in the attached picture. Depending on how far forward you have the tire it could potentially interfere with…

view full answer...

Answer 12

Well shackle length is mainly based on the height difference between the front and rear hangers. The rear hanger normally doesn't hang as low as the front so that the shackle can offset the difference and add the ability to move. What is the…

view full answer...

What Quantity Are Happijack Qwik Load Upgrade Sets Sold In

Product Page this Question was Asked From

Continue Researching