Trailer Wiring Harness Fit on 2021 Chrysler Pacifica Touring L

Question

Question:

I need a wiring harness for a 2021 Pacifica Touring L awd

asked by: Tony N

0

Expert Reply:

We do have a trailer wiring harness that is a fit for your 2021 Chrysler Pacifica Touring L model:

- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56322

expert reply by: Kyle S

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Another wire or harness is not needed on the 2023 Honda CR-V for the install of the Curt 4-Way Wiring Harness #C56370, but you do have to add 20 amp fuse to location #17 in the fuse box.

view full answer...

Answer 3

The etrailer Trailer Hitch Receiver #e98903 is rated for 400 lbs tongue weight and 4,000 lbs towing, but that looks to be more than what your 2018 Chrysler Pacifica is rated for. When I looked up the online manual for your vehicle it looks like your…

view full answer...

Answer 4

I checked with Curt for you and confirmed the Curt Trailer Hitch Receiver part #C24BR as a fit for a 2022 Jeep Grand Cherokee WL 4xe. This hitch is an excellent option because it installs behind the bumper so it won't even be visible while not in…

view full answer...

Answer 5

I have attached a video of the etrailer.com Trailer Hitch Receiver part #e98903 installed on the 2020 Chrysler Pacifica. We do have a video of an install on a 2018 which would be the same as your 2020 Chrysler Pacifica. The underbody panel does need…

view full answer...

Answer 6

The Dexter 8-427 hub is no longer available. Even looking through Dexter's site the only references to it are replacement bearings. You can use a wheel with a larger pilot hole as long as the wheel attaches to the hub using lug nuts and not…

view full answer...

Answer 7

I recommend the Dexter Zinc-Plated Model 10 Brake Actuator w/ Drop to replace your current Tie Down actuator. You will need either the Disc Brake Actuator #T4750620 or Drum Brake Actuator #T2478100. These both have a similar design as your current…

view full answer...

Answer 8

There are indeed many variants of the 2019 Chrysler Pacifica and these have the following official model designations: Limited LX Touring Touring L Touring L Plus Touring Plus The "L" appears to be the same wiring fit as the Limited so you…

view full answer...

Answer 9

The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part #C56322 is a fit for a 2021 Chrysler Pacifica Limited, Touring L, and Touring L Plus. If you're unsure of which sub-model you have then you can reach out to the…

view full answer...

Answer 10

Yes, I can confrim for you that the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C56399 WILL fit your 2017 Chrysler Pacifica LX. This connector fits both the LX and the Touring models and will work for you.

view full answer...