Anti-Sway Bars, SumoSprings, & Steering Stabilizer Fit on 2016 Fleetwood Bounder 35K

Question

Question:

IM WORKING ON A 2016 FLEETWOOD BOUNDER 35K I need to make sure im getting the correct parts. need front, rear anti sway bar kits, steering stabilizer and the sumo kits

asked by: SERGIO P

0

Expert Reply:

We have exactly what you need for your 2016 Fleetwood Bounder 35K - the front anti-sway bar, rear anti-sway bar, rear SumoSprings and front SumoSprings. I'll list exactly what you need for your motorhome:

- SumoSprings Maxim Custom Helper Springs - Rear Axle # SSR-187-54-1

- SumoSprings Rebel Custom Helper Springs - Front Axle # SSF-170-40-2

- Roadmaster Exact Center Steering Stabilizer # RM42RR

- Roadmaster Front Anti-Sway Bar # RM-1139-148

- Roadmaster Rear Anti-Sway Bar # RM-1139-149

In regards to the rear anti-sway bar, the only thing you need to keep in mind is that the factory u-bolt may not be long enough for the factory nut, washer and 1/2" plate with this anti-sway bar. If it does not, if you have square top u-bolts you will need # RM-590050-00, and if you have round top u-bolts you will need # RM-590050-10.

All together, the addition of these parts is going to dramatically increase the handling and comfort of the 2016 Bounder.

expert reply by: Kyle S

0

Answer 1

For a 2012 Winnebago Vista 35F Class A motorhome on a F53 chassis you'll need the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM42RR. I've attached a short video below where I'll walk…

view full answer...

Answer 2

The 2020 Fleetwood Bounder 35K is on a Ford F-53 Chassis and the correct stabilizer is the Roadmaster Exact Center Steering Stabilizer #RM42RR. You made a nice choice as the stabilizer will provide dramatic improvements to the motorhome's…

view full answer...

Answer 3

Hey Dave, Air Springs and SumoSprings both fall under the same category with the main goal to help prevent sag but offer different styles of solutions. Air springs offer the adjustability to help level your ride back out, which can make a huge…

view full answer...

Answer 4

Hello John. I can definitely point you in the right direction, but I will need more information from you. Can you tell me the sub-model/floorplan of your 2017 Sunseeker Class C Motorhome? I will also need to know the chassis manufacturer in order to…

view full answer...

Answer 5

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 6

The Roadmaster Rear Anti-Sway Bar for Motorhomes #RM-1139-143 can use your factory u-bolts if they are long enough. If they are not, then Roadmaster recommends using the 7/8 inch diameter u-bolts that are longer (most likely the larger diameter due…

view full answer...

Answer 7

No, the Roadmaster Rear Anti-Sway Bar #RM-1129-130 will not require any drilling to install on your 2011 Ram 3500. Keep in mind that this sway bar is intended for vehicles with dual rear wheels only. For single rear wheel vehicles you will want the…

view full answer...

Answer 8

To replace the right clearance light on your 2014 Big Sky Montana I recommend going with the Amber Optronics #MCL44AB. This isn't a "direct" replacement as this is a 2 wire design, but we actually have a customer review on this product…

view full answer...

Answer 9

Congratulations on your new Elkhart! I'm sorry to hear you're having trouble getting your Greystone fireplace to work. There are troubleshooting steps you can take to try to get your fireplace working again. The manufacturer recommends…

view full answer...

Answer 10

When installing the Roadmaster Front Anti-Sway Bar and TruTrac Rod Kit #RM-1259-106 you will want those brackets sit flush; you can enlarge the hole or drill a new one so that you can get the bracket sitting flush to the rail. My contact over at…

view full answer...

Answer 11

Yes I can! For a front sway bar to fit your 2005 Fleetwood Bounder 34F built on a Workhorse W22 chassis you would want the Roadmaster Front Sway Bar part #RM-1259-105 and for a rear sway bar you would want the part #RM-1259-108. I confirmed these…

view full answer...

Anti-Sway Bars, SumoSprings, & Steering Stabilizer Fit on 2016 Fleetwood Bounder 35K

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching