Distance From Passenger Side Bolts to Angle on Curt 13429 Hitch for 2001-03 Toyota Highlander

Question

Question:

What is the distance from the passenger side mounting holes to the first angle change? I just want to make absolutely sure this will fit around the muffler on my 2002 toyota highlander.

asked by: Bradley

1

Helpful Expert Reply:

The dimensions you're looking for is 8" from the bolt hole to the angle of the hitch crosstube on the Curt # C13429. This hitch has been confirmed as a fit on the 2002 Toyota Highlander, and it is designed to fit around the muffler as you've mentioned. I've also linked our installation video of this hitch for you to check out, which you might find helpful.

expert reply by: Erik B

1

dimensions
(click to enlarge)

Answer 1

You are correct that the Curt Trailer Hitch Receiver, part #C13429, is not rated for use with a weight distribution system and should not be used with one. we used to carry a Hidden Hitch that was the only hitch we had for your 2000 Lexus RX 300…

view full answer...

Answer 2

Yes, the Universal MightyMounts for Yakima Roof Mounted Accessories part #Y03590 will allow you to mount your Yakima HullyRollers and Yakima Mako Saddles on aero crossbars.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 8

As far as wiring for the 2024 Toyota Grand Highlander, we do have the Curt #C59236 available which is more of a universal hardwire harness. Unfortunately there are not any plug-and-play options that have been confirmed to fit as of yet (October 4,…

view full answer...

Answer 9

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Answer 10

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 11

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 12

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

view full answer...