Dimensions of Torklift hitch # TLC1205-30

Question

Question:

What are the specs for the hitch. Hight width and center if bolt holes side to side. Thanks.

asked by: Kurt G

0

Expert Reply:

I checked with Torklift and they informed me that their hitch part # TLC1205-30 has the following dimensions:

The center to center hole is approx 39.5"
total width is about 41.5"
side plate height is 9.75"

expert reply by: Jameson C

0

Hitch Dimensions
(click to enlarge)

Answer 1

Looks like you have a service body truck/van based on your pictures. There are only multi-fit hitches that will fit that type of vehicle. I spoke to my contacts at Curt and Reese and the only styles of hitches that can be made to fit a service body…

view full answer...

Answer 2

The current Torklift tie down part #TLD3101 that you have installed on your 1997 Dodge Ram 3500 only fits if you have the factory hitch. If you go with the SuperHitch part #TLD1100 you would need to change your rear tie down to the part #TLR3503.

view full answer...

Answer 3

Yes, the Torklift Class V hitch part #TLC1205 would be a great option for your 2002 Chevy Silverado 2500HD long bed. If you instead had a short bed truck you would want the part #TLC1204. The 17k capacity is more than what your truck is rated for so…

view full answer...

Answer 4

The 48 inch size part #TLE1548 would be your best option as having a little bit extra extension would give you a little better clearance in tighter turns. Especially since your hitch is probably a little recessed under your bumper and extra length…

view full answer...

Answer 5

We have just what you're looking for. The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems #LC733960-182524 is compatible with your HappiJac 4160 Series jacks and will allow you to convert your system from manual to…

view full answer...

Answer 6

There is a TorkLift SuperHitch that fits your 2012 Ram 3500 with a factory hitch that is welded on, though it is a different part number than the one you mentioned. There are two options for a TorkLift SuperHitch for your truck, one with a 2 inch…

view full answer...

Answer 7

The highest tongue weight rated weight distribution system we have is the TorkLift SuperHitch part #TLWD1000 which has a tongue weight range of 1,500 to 3,000 lbs. This does require you to have a dual Torklift Hitch setup on your truck though so I…

view full answer...

Answer 8

I would agree with your assessment that the Superhitch Magnum 30k part #TLC1205-30 is overkill from a weight capacity point of view and the Original part #TLC1205 is more closely rated to what your vehicle is equipped for. Beyond that the Magnum has…

view full answer...

Answer 9

The Reese number that you supplied is now #RP58112, a replacement head for a Reese Round Bar WD System. This head is rated at between 600-1200 lbs on the tongue weight when using the round spring bars. The max gross trailer weight when using 600…

view full answer...

Dimensions of Torklift hitch # TLC1205-30

Product Page this Question was Asked From

Continue Researching