Best Trailer For Single 12 Foot Kayak

Question

Question:

I have a 12 ft Kayak that is about 77lbs. Empty. Look for a trailer to tow behind SUV that would fit. Highway driveable

asked by: Ron T

0

Expert Reply:

I recommend using something like the CE Smith Multi Sport Trailer # CE48810. This one is a bunk style which I like using with heavier boats like your 77lb kayak. This trailer is for a 12 foot boat and it comes with load range B tires so it's rated for 65 MPH.

expert reply by: Adam E

0

Answer 1

The CE Smith Boat Trailer #CE48810 does come as a kit and would need to be assembled. This trailer is designed for boats and PWCs up to 12 ft long, and has a weight capacity of 800 lbs. This would not be a tough task to assemble if you have someone…

view full answer...

Answer 2

The least expensive option we can offer you to transport the Sun Dolphin Water Tender Dinghy is with the CE Smith Multi Sport Boat Trailer part #CE48810. This boat trailer will be perfect for you as it comes with everything you need to hit the…

view full answer...

Answer 3

If the tires on your CE Smith Multi Sport Boat and Kayak Trailer #CE48810 have some play then that would definitely be contributing to what you're hearing. If the lugs are tight then this means that your spindle nut needs to be tightened down as…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Load range B trailer tires are going to have a lower capacity than C load range tires. Basically that, psi rating, and the ply rating are the only differences. A higher load range tire would last a little longer than lower load ranges of the same…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 8

A BT8 spindle would have a diameter of .99 of an inch where the bearings would both install and would have a diameter of 1.24 where the great seal would ride. That would require a hub part #AKIHUB-440-2-1K for an idler hub. A BTR spindle would have…

view full answer...

Answer 9

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

view full answer...

Answer 10

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

The CE Smith Multi Sport Plus Boat and Kayak Trailer w/ Bunks #CE48870 that you referenced was designed to be used with boats that are up to 14 feet in length like what you have now. I attached a picture that shows the range of where the winch…

view full answer...

Best Trailer For Single 12 Foot Kayak

Product Page this Question was Asked From

Continue Researching