Replacement Operator Mechanism for MaxxAir MaxxFan 4500K Series

Question

Question:

I have a question about part # MA10-20281K-1AF? I have a MaxxAir serial number 2018-03-A4501K-A00203 Will this part work on my fan?

asked by: Lucas W

0

Expert Reply:

Yes. Your serial number indicates that you've got a 4500K series Maxx Fan, so you can use the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents # MA10-20281K-1AF to replace your operator mechanism.

expert reply by: Erik B

0

Answer 1

For your 4900K model you will want the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF since your model isn't opening.

view full answer...

Answer 2

The correct Replacement Operator Mechanism for your model 4751KS MaxxAir MaxxFan is part #MA10-20281K-1AF. If your fan lid is unable to open even manually, then this is the part you need to replace. The other part you referenced, #MA10A04751KS would…

view full answer...

Answer 3

The correct replacement operator mechanism for a MaxxFan Deluxe Roof Vent is the Replacement Operator Mechanism part #MA10-20281K-1AF. I really wish I could provide you with exact step by step instructions for replacement but the manufacturer simply…

view full answer...

Answer 4

We do have the lift motor you are looking for as our part number #MA10-20270 which is the correct lift motor for your 4501K MaxxAir fan.

view full answer...

Answer 5

The model number for fans such as the MaxxAir MaxxFan Mini Roof Vent, #MA00-04401M is listed on the upper side of the assembly itself. Please see the attached image. You will best identify this by opening the vent and climbing on top of the RV.…

view full answer...

Answer 6

Sounds like your roof vent lid isn't closing all the way when you ask it to which is why the fan isn't shutting off and also explains the clicking of the operator as it's trying to close it. In the past we've seen similar issues to…

view full answer...

Answer 7

I've attached an exploded diagram photo of the vent assembly that uses the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF for you to check out. You'll need to use it as a guide for…

view full answer...

Answer 8

The serial number should be located on the base of the unit under the screen. I would need this to confirm parts but it's likely the correct one for you is the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents…

view full answer...

Answer 9

The hole on the Replacement Operator Mechanism for MaxxAir MaxxFan Plus or MaxxFan Deluxe Roof Vents #MA10-20281K-1AF that you marked can be used. That hole is designed to be used as a mounting point, if your fan requires an "L" bracket for…

view full answer...

Answer 10

Sounds like you have a damaged or worn out roof vent operator and need to replace it with the part #MA10-20281K-1AF since you said the motor doesn't want to fully open or close the lid and it's difficult to turn by hand.

view full answer...

Answer 11

When installing the #MA10-20281K-1AF replacement operator, you might need to 'clock' the mechanism slightly which could take a little bit of trial and error, but the replacement operator does include installation instructions. I've…

view full answer...

Answer 12

The two most likely causes of a MaxxAir vent fan lid not opening or closing are either going to be a lift motor or operator failure. I recommend removing the motor and applying power directly to this to see if the shaft turns. If not, you know the…

view full answer...

Replacement Operator Mechanism for MaxxAir MaxxFan 4500K Series

Product Page this Question was Asked From

Continue Researching