Replacement Operator Mechanism for MaxxAir MaxxFan 4751KS

Question

Question:

Is this the replacement operator for Maxxair Maxfan model 4751 KS ?

asked by: Ray

0

Expert Reply:

The correct Replacement Operator Mechanism for your model 4751KS MaxxAir MaxxFan is part # MA10-20281K-1AF. If your fan lid is unable to open even manually, then this is the part you need to replace.

The other part you referenced, # MA10A04751KS would replace the printed circuit board on your MaxxFan instead.

If you aren't sure which part needs to be replaced on your MaxxFan, let me know what issues you're having with it and I'll be happy to point you in the right direction.

expert reply by: Carla M

0

click to enlarge

Mike P.

5/5/2020

What about the lid replacement for model# 4751KS? Thanks for any help.

Reply

Chris R.

5/7/2020

For the replacement white lid, the part # MA10A40002K will work perfectly.

Reply

Answer 1

We do have the correct replacement operator mechanism for your MaxxFan Plus model 4751KS, which is the following part: - Replacement Operator Mechanism #MA10-20281K-1AF Instructions are included along with the mechanism.

view full answer...

Answer 2

If the electrical lift on your MaxxFan 4751KS it's likely that the lift operator mechanism has gone bad, so you can use the Replacement Operator Mechanism #MA10-20281K-1AF and that should get you back up and running assuming everything else…

view full answer...

Answer 3

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

Hey Kevin, so the Bearing Buddy part #BB2717SS does fit the Lippert 7k axle so it is the correct size BUT you will need to yank the zerk fitting off your EZ lube style spindle. I would first try putting vice grips on the zerk so that you can focus on…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

Thank you for all of your info! Your monitor is from the Furrion Vision S series of back up camera systems so to replace your camera you just need the Furrion Vision S Wireless RV Backup Camera w/ Night Vision #FCN48TASF.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Progressive dynamics doesn't offer a Lithium-Ion compatible converter only that would replace the one used in your WF-8725, so you'd need to replace the entire power center panel using part #PD4135K which is compatible with Li, lead acid,…

view full answer...

Replacement Operator Mechanism for MaxxAir MaxxFan 4751KS

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching