What Size Bolts Does the Hitch for a 2010 Nissan Frontier Use

Question

Question:

I would like to ask what size Hex bolt is used for this install? I understand them to be M12 1.25 by 35mm. Correct??? I would like to buy a single bolt here at a store just to be able to test and clean out the mounting holes in advance of ordering and installing from you. Want to be certain the bolt holes are useable. They do have some surface rust of course from never having been used. Thanks. Mike

asked by: Mike

1

Helpful Expert Reply:

The weld nuts in the frame on a 2010 Nissan Frontier are indeed M12 x 1.25 x 35mm which is what the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75282 will use. I'd simply pick up a 12 mm x 1.25 Tap locally and clean the holes out beforehand.

expert reply by: Conner L

1

Answer 1

The six hex bolts that come with the etrailer Trailer Hitch Receiver #E98869 for attaching to your 2019 Nissan Frontier are M12-1.25 x 35mm. The washers are 7/16" conical tooth washers. If you are in need of replacements we have the…

view full answer...

Answer 2

We do indeed have the installation bolts available for your newly obtained trailer hitch to mount to your 2012 Nissan Frontier with part #RHK. What you will need to do is simply type in the model number for your hitch into the text box provided on…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

For your 2024 Nissan Frontier I recommend the etrailer Trailer Hitch Receiver #e98869. This is a Class III hitch with a 2" receiver and a max gross trailer/tongue weight of 5,000/500 lbs. This hitch also features a matte black powder coat…

view full answer...

Answer 6

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" #75282 requires all hardware be torqued to 68 foot pounds according to the instructions. I've attached a photo in case you need anything else for this…

view full answer...

Answer 7

You will want to match the ball you use with what the trailer coupler requires. It is definitely possible that the coupler could come off of the ball if you are using a ball that is too small for the coupler. We have many 2-5/16 inch balls. I have…

view full answer...

Answer 8

Just looking at your Tern HSD bike with fenders, I'm going to say no the Saris MHS Bike Rack for 1 Bike #SAR23MR is not going to work. I did some research and it looks like a lot of Tern owner's went with the Hollywood Racks Sport Rider SE…

view full answer...

Answer 9

The Draw-Tite Max-Frame Trailer Hitch Receiver #75282 will have the following bolt hole dimensions for your 2015 Nissan Frontier. The Bolt holes from drivers side to passenger side frame rails are 43-5/8" on center. The holes running from front…

view full answer...

Answer 10

So you will need to access the 12 pin jumper plug in your Frontier's cab, which as you said is on the passenger’s side behind the kick panel. This is where you will install the harness and relays that activate the trailer tow package, and the…

view full answer...

Answer 11

The Draw-Tite Class III #76031 hitch installs using six M12 x 1.25 x 35mm CL 8.8 bolts, 1/2 inch flat washers and lock washers. If your Pathfinder has been used in the rust belt where chemicals are used on road surfaces in the winter, there's…

view full answer...

Answer 12

The Edge x00002300 will not be transferable to your 2012 Ram 2500. There are tuners available though, such as the Edge Diesel Evolution CTS3 Performance Tuner #EP36YR, which can give your Ram more horsepower, torque and fuel economy. It has power…

view full answer...

What Size Bolts Does the Hitch for a 2010 Nissan Frontier Use

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching