Will Edge x00002300 Work on 2012 Ram 2500 With 6.7L I6 Diesel Engine?

Question

Question:

Edge x00002300 Will this work on a 2012 6.7 Cummins?

asked by: Calvin B

1

Helpful Expert Reply:

The Edge x00002300 will not be transferable to your 2012 Ram 2500. There are tuners available though, such as the Edge Diesel Evolution CTS3 Performance Tuner # EP36YR, which can give your Ram more horsepower, torque and fuel economy.

It has power levels designed for daily driving, towing, performance, and extreme; a 5" color touchscreen, can record engine data and simply connects to the OBD-II port on your truck. I've added a link to a video review of this tuner for you to take a look at, as well as a link to our selection of tuners that will work with your Ram.

expert reply by: Kyle S

1

Answer 1

The Edge Diesel Evolution CTS2 Performance Tuner (X00002300) that you referenced is only a fit for Ford F-Series Super Duty Trucks so it is not compatible with your truck. The correct Edge Diesel Evolution CTS3 Performance Tuner for your 2003 Dodge…

view full answer...

Answer 2

The weld nuts in the frame on a 2010 Nissan Frontier are indeed M12 x 1.25 x 35mm which is what the Draw-Tite Max-Frame Trailer Hitch Receiver part #75282 will use. I'd simply pick up a 12 mm x 1.25 Tap locally and clean the holes out…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 6

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 7

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 8

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...

Answer 9

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Answer 10

Hey Antoine, so the two kits you mentioned are actually really similar and honestly I would go with the part #ETBC7 if I were you. The #ETBC7L is basically the same thing minus a couple wires and breakers so you may as well get the kit that has…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Will Edge x00002300 Work on 2012 Ram 2500 With 6.7L I6 Diesel Engine?

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching