Will the Kodiak Disc Brake Kit with 10" Rotors Work With 13" Wheels  

The disc brakes you need will be determined by the weight of your axles (not the total capacity of your trailer), the size of your brake mounting flange (4-bolt most common), and the rotor diameter of your disc brakes. The best way to find the weight…

There are exceptions to some rules, generally speaking 13 inch trailer wheels will not work with 10 inch hub and drums. Your wheels might be manufactured differently than most and there isn't a clearance issue like on most. I would imagine the…

To give you your upgraded brake system, I recommend using the Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and KodaGuard - 3,500 lbs #K2R35DKG which will install right over your current hubs. I also recommend using the Kodiak…

There are a few things that you will need to know in order to choose the right disc brake kit for your 2003 DHM boat trailer. I assume you have idler hubs and are replacing your brakes so you already have a 4-bolt brake mounting flange #4-35 as well…

The trailer will have a plate or sticker on it that will list the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that will list the weight capacity. You can…

The Titan Premier Disc Brake Kit #T2HRCM10DAC that you referenced has a hub bore of 1.980 inches, so you have identified the correct set of Bearing Buddy grease caps for use with it, part #BB1980A-SS.

I recommend using Grade 5 1/2" x 4" bolts to install the Demco Channel Tongue Trailer Coupler part #DM12717. These would allow for the full weight capacity of the coupler to be achieved. These can be picked up at most local hardware…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

Hey Richard, thanks for reaching out! The Dexter DX7.5 Drop-N-Go Brake Actuator #099-175-00 is a great option for a replacement actuator because it's a direct replacement for the common Model 60 actuators that were popular in the '90s.…

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…