Curt Hitch Recommendations for a 2006 Chevy Silverado 2500HD

Question

Question:

will this one fit my 06 chevy silverado 2500hd

asked by: Matt

0

Expert Reply:

As long as you have a 6-1/2 ft bed on your 2006 Chevy Silverado 2500 HD the Curt Hitch # C15302 will work for you.

If you have an 8 ft bed you would want a Curt Hitch # C15313.

expert reply by: Jameson C

0

Answer 1

The confusion is that the two answer pages have two different hitches they are referring to. The #C15312 measures 2-3/4 inches from the mounting flange down to the hitch opening and the #C15313 measures 5-5/8 inches. I attached a picture that has…

view full answer...

Answer 2

I called my contact at Curt to confirm these measurements on the Curt #C15313 trailer hitch for you. The width of the hitch from center to center of the bolt holes measures 38-7/8 inches. The top of the receiver to the mounting holes measures 5-7/16…

view full answer...

Answer 3

With Curt Trailer Hitch Receiver #C15302 installed on a 2003 Chevy Silverado 2500 short bed the hitch will be in the same position as a factory hitch or at least within a fraction of an inch. By that I mean the receiver will be right under the rear…

view full answer...

Answer 4

There are quite a few holes on the frame of your 2002 Chevy Silverado 2500HD short bed that hitches can attach to like the Curt you mentioned part #C15302. This is why the hitch fits for your truck have a few different bolt hole variations. I…

view full answer...

Answer 5

Yes, the Curt Trailer Hitch Receiver #C15302 does not have the bolt holes that also secure it to the bumper on your 2009 Chevrolet Silverado 2500HD with the short bed. This is fine as the construction for this receiver is much stronger than that on…

view full answer...

Answer 6

My contact at B&W Trailer Hitches said that it is normal for the spacers to bend on hitches once they are tightened down to specifications. What you are seeing on your 2007 Chevrolet Silverado New Body when you installed the Class V B&W…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...