Replacement Glass Oven Door for Furrion

Question

Question:

My furrion oven door middle glass shattered for some unknown reason. Need to replace it and was wondering if you all have an alternate part. Model FSRE17SA-BL.

asked by: Barbara F

0

Expert Reply:

We have the Replacement Glass Oven Door for Furrion 2-in-1 Range Oven in Black, # 715326. And in Stainless Steel for 17" Ovens, # FR52FR. If you have the 21" the one you will need # FR79ZR.

expert reply by: Michael R

0

Answer 1

Yes the stainless #FR52FR is the same as the black part #715326 so they are interchangeable.

view full answer...

Answer 2

The Replacement Glass Oven Door for Furrion 2-in-1 Range Oven #715326 for the Furrion 2-in-1 Range Oven with Glass Cover FSRE17SABL, which is no longer available is actually slightly different than the: -Replacement Stainless Steel Oven Door for…

view full answer...

Answer 3

We were able to get the dimensions for you of the replacement door you asked about: - Replacement Glass Oven Door for Furrion 2-in-1 Range Oven - Black #715326. This door measures 21-3/8” wide x 11-3/4” tall by 1-1/4” thick. I have added a cut out…

view full answer...

Answer 4

We do have replacement Furrion oven doors available. If you have the 17 inch tall oven door you'd need the part #715326 for black, part #FR52FR for stainless steel, or part #FR79ZR for 21 inch stainless steel, or part #FR66NR for 21 inch…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two…

view full answer...

Answer 6

The absolute best cushioned equalizer that fits the dimensions you mentioned having would be the MORryde ALLTREK 4000 part #MR89DR as this is only option to provide vertical and horizontal cushioning. This would make a big difference and you'd be…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

I understand your worry Tom, and I have a couple recommendations. First is the MORryde ALLTREK 4000 Shock Absorbing Equalizers #MR89DR which has a height of 4-1/2" for the mounting bolts. This is also 6-1/2" in width like the shorter…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

Hey Doug, thanks for reaching out! The MORryde ALLTREK 4000 #MR89DR dimensions can be a bit difficult to explain via text so I've attached an image giving you the dimensions you're asking about!

view full answer...