Can the Hollywood Racks Hitch Pin Lock be Ordered to a Specific Key Number

Question

Question:

How can I get a hitch pin lock that is keyed to match my existing rack? My rack came with a match-keyed HRLHPC2 lock set, but the hitch pin lock has been lost. Id rather not have separate keys. Thanks

asked by: Darin W

0

Expert Reply:

The Hollywood Racks 2" Hitch Lock and 8' Cable Lock for Bike Racks, part # HRLHPC2, cannot be keyed to a specific key number, unfortunately. The pin on its own, part # HRLHP2, can only be keyed unique and they are sent out with random key numbers.

The only option to get a keyed-alike hitch pin lock is to order a new set of the Pin and Cable locks.

expert reply by: Kef G

0

Answer 1

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 2

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 3

Yes, you can! So long as our Kenda Loadstar 5.30-12 Bias Trailer Tire with 12" White Wheel item #AM30820 is the same size and bolt pattern as what's on your Ironton trailer it can be used not only as a spare but also on your trailer with the…

view full answer...

Answer 4

Without knowing how far your hitch sticks out from your Airstream trailer and how wide your handlebars are I can't give you a yes or no answer but I can provide some measurements that will allow you to. From the hitch pin hole to the center of…

view full answer...

Answer 5

At the rear of a trailer or RV the ride quality is very rough when compared to the ride quality at the rear of a passenger vehicle. Reason being the suspension isn't as sophisticated and there is a longer distance between the rear axle and the…

view full answer...

Answer 6

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

view full answer...

Answer 7

Yes, there is a front mounted hitch for your 2022 Ford F-350 dually with a diesel engine. It is the EcoHitch Hidden Front Mount Trailer Hitch Receiver item #EH83GR. This hitch is custom fit and bolts to your Ford with included hardware. This front…

view full answer...

Answer 8

I have a one lock security solution for you. I recommend the 2 Inch Hitch Receiver Lock with 8 Foot Cable, Item #HRLHPC2. This Master Lock will secure your trailer hitch receiver and cargo carrier with locking pin and clip. You can wrap the 8 foot…

view full answer...

Answer 9

The Hollywood Racks RV Rider Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount, part #HLY64FR, is the HR1700 model. I have included a video review link below.

view full answer...

Answer 10

If you meant to ask about how to securely lock the Rightline Cargo Bag #RL100S30 you were looking at to your vehicles roof, I have a solution for you. I recommend the Rightline cable lock #RL100640 for their cargo bags that has a retractable steel…

view full answer...

Can the Hollywood Racks Hitch Pin Lock be Ordered to a Specific Key Number

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching