How To Choose the Correct MORryde CRE3000 Rubber Equalizers

Question

Question:

Would like to talk to someone about CRE 3000 kit for my 2018 Grand Design Mommentun 397 TH

asked by: Mark S

0

Expert Reply:

The MORryde CRE3000 Rubber Equalizers are a great upgraded equalizer option for any trailer. They are cushioned so they will do a great job of absorbing road shock and providing a smoother ride. In order to choose the correct ones you'll need to measure your axle spread (on center). If you have 33" then use part # MR87ZR but if you have 35" then use part # MR27ZR.

expert reply by: Conner L

0

Answer 1

I contacted MORryde and this does happen from time to time as the weight of the trailer can spread out the axles due to downward pressure on the springs/suspension. Odds are the 35" wheel base #MR27ZR will be the correct one for you, but they…

view full answer...

Answer 2

Finding the correct MORryde equalizer kit will be pretty specific, so I cannot tell you which will be correct without knowing the wheel spacing and axle capacity, unfortunately. With that being said, if you have the trailer's VIN, you may be able…

view full answer...

Answer 3

It really comes down to knowing what Equaflex you have now or the dimensions of them and then picking out the matching MORryde kit. The part #MR87ZR is made to fit the most common dimensions as it is for 33 inch wheelbases and has 6-1/2 inches…

view full answer...

Answer 4

Yes, axle spread and wheel base by definition are the same measurements. You will measure from the center of one axle to the center of the 2nd axle to determine what you axle spread is. This may be difficult as some wheels and covers will make this…

view full answer...

Answer 5

The MORryde Suspension Upgrade Kit #MR58ZR uses the Flange Lock Nut #006-092-01.

view full answer...

Answer 6

Yes, there is an upgrade for the Dexter Curved Equalizer part #K13-142-02 that you have on your trailer now and that is the Equa-Flex Cushioned Equalizers part #LC314336 which have a rubber core that minimizes back-and-forth movement in addition to…

view full answer...

Answer 7

For a standard replacement equalizer for your Dexter 13-122 equalizers you'd want the #TREQE1 or for a cushioned version you'd want the part #K71-653-00 which comes with new shackles and bolts. For a kit that includes new bolts, bushings, and…

view full answer...

Answer 8

As your axles measure 35" apart from center to center but the frame hanger spread (FHS) measured 58-3/4", you did go the correct way. The axle spacing is definitely important, but the FHS is more so. Just be aware that you axle spacing may…

view full answer...

Answer 9

I reached out to MORryde and the MORryde Rubber Equalizers for Tandem Axle Trailers - 35" Wheelbase - 8K #MR27ZR you were looking at is designed for 35" axle spacing and would not work with your trailer with 36" axle spacing. My…

view full answer...

Answer 10

Though it will depend on the size of your current equalizer, the MORryde 14-3/4" Shock Absorbing Equalizers #MR34AR will measure 3-1/4 inches from the center of the bolts on the outside to the top bolt. I included a diagram that should explain…

view full answer...

Answer 11

The MORryde Rubber Equalizers for Tandem Axle Trailers - 35" Wheelbase - 8K #MR27ZR you were looking at measure 8" between the horizontal mounting holes, and 3-5/16" between the center of the horizontal mount holes and the vertical…

view full answer...

Answer 12

No, that is not completely true. The wet bolts can be re-used as long as they are not rusted, cracked or damaged in any other way, to include the splines or threads being damaged. The main thing that you'd want to replace is the lock-nut which…

view full answer...

How To Choose the Correct MORryde CRE3000 Rubber Equalizers

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching