Availability of High Rise 2 Inch Trailer Ball For Moving Trailer With Front Mounted Receiver
Question:
It I just received a front receiver mount from you and need to get a high and long enough hitch and ball setup so as to move the trailer in a tight driveway Receiver setup went great! 2017 Tundra My trailer coupler is at 19” top of cup the receiver exits at 10” The bar needs to clear the front bumper before rising up. Possibly Item D-28 will reach but I would need a extra tall ball and it would be close. Are there 2” balls with more than 1” rise? Ideas? Thank you
asked by: Tony P
Helpful Expert Reply:
It sounds as if the Curt # C40034 high rise trailer ball is what you're looking for. This is a 2 inch ball with a 2 inch rise. The Curt # D-28 is a pretty long ball mount, the hitch pin hole to the closest portion of the ball platform is 8-1/4 inches, as shown in the provided diagram. You can measure from the hitch pin hole out to the closest edge of the bumper to see if the D-28 would provide enough clearance.
Products Referenced in This Question
2" Hitch Ball - 2" Rise - 1" Diameter x 2-1/8" Long Shank - 6,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Hi-Rise Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 6000 lbs GTW
- Class III
- CURT
more information >
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Product Page this Question was Asked From
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
- Front Receiver Hitch
- Custom Fit Hitch
- Front Mount Hitch
- 500 lbs Vert Load
- 9000 lbs Line Pull
- 2 Inch Hitch
- Square Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Search Results: yakima rack and roll
- Shop: Yakima Rack and Roll Trailer - 78"
- Shop: Curt Drawbar for 1-1/4" Hitches - 5-3/8" Rise, 6" Drop - 5-9/16" Long - 2K
- Shop: Yakima Rack and Roll Trailer - 66"
- Search Results: 1 14 anti rattle
- Shop: Trailer Wiring
- Shop: Front Mount Hitch
- Q&A: Availability of 1-1/4 Inch Ball Mount with 7-1/2 Inch Rise
- Q&A: Dimensions of Yakima Replacement Tower Kit # 8880179
- Q&A: Recommend Ball mount with High Rise for a 2013 Chevrolet Sonic Hatchback
- Q&A: Using a Ball Mount with More Rise Instead of a Hi-Rise Hitch Ball on a Class I or II Hitch
- Q&A: Yakima Replacement Tower Kit For Rack And Roll Bolt Size
- Shop: Curt Class I Drawbar - 5" Rise - 9-9/16" Long - 2,000 lbs
- Shop: 2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Shop: Replacement Tower Kit for Yakima Rack and Roll Trailer - Qty 2
- Shop: Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
- Q&A: Yakima Rack and Roll Trailer 66 Inches Disassembly for Storage
- Q&A: Front Hitch and Winch Recommendation for a 2014 Toyota Tundra
- Video: Front Mount Trailer Hitch Installation - 2014 Toyota Sequoia - Curt
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Search Results: dust cap
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Video: Tow Ready 4-Pole Mounting Bracket Installation