Using a Ball Mount with More Rise Instead of a Hi-Rise Hitch Ball on a Class I or II Hitch
Question:
I am looking for a 2inch ball, with a 2inch Shank rise, for a Class I/II hitch 3/4 shank diameter. All the High Rise balls I can find are for 1inch shank diameter or larger.
asked by: Bryan
Expert Reply:
Like you said all of the hi-rise hitch balls have a larger shank diameter than 3/4 inches. They are all either 1 inch or 1-1/4 inch. But depending on how much total rise you need there may be a ball mount you can use that will get you close if not at the height you need.
I have included a link below to our help article that shows how to measure to select a ball mount with the correct rise or drop. The Class I ball mount with the most rise is # C45028 with 5-3/8 inches rise. But it has a very short shank. I have linked a video review of it for you.
Products Referenced in This Question
Curt Drawbar for 1-1/4" Hitches - 5-3/8" Rise, 6" Drop - 5-9/16" Long - 2K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- CURT
more information >
Product Page this Question was Asked From
2" Hitch Ball - 2" Rise - 1" Diameter x 2-1/8" Long Shank - 6,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Hi-Rise Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 6000 lbs GTW
- Class III
- CURT
more information >
Continue Researching
- Shop: Trailer Hitch
- Search Results: yakima rack and roll
- Shop: Yakima Rack and Roll Trailer - 78"
- Shop: Curt Drawbar for 1-1/4" Hitches - 5-3/8" Rise, 6" Drop - 5-9/16" Long - 2K
- Shop: Yakima Rack and Roll Trailer - 66"
- Search Results: 1 14 anti rattle
- Shop: Trailer Wiring
- Shop: 2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Shop: 2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Chrome - 3,500 lbs
- Shop: Curt Class I Drawbar - 5" Rise - 9-9/16" Long - 2,000 lbs
- Shop: Convert-A-Ball Ball Mount for 2" Hitches - 10-3/4" Rise, 12" Drop - 7,000 lbs
- Q&A: Yakima Replacement Tower Kit For Rack And Roll Bolt Size
- Q&A: Recommend Ball mount with High Rise for a 2013 Chevrolet Sonic Hatchback
- Q&A: Availability of 1-1/4 Inch Ball Mount with 7-1/2 Inch Rise
- Q&A: Availability of High Rise 2 Inch Trailer Ball For Moving Trailer With Front Mounted Receiver
- Q&A: Dimensions of Yakima Replacement Tower Kit # 8880179
- Search Results: balls
- Video: Review of Curt 2 Inch Trailer Hitch Ball - A-90
- Video: Curt Long Shank Hitch Ball Review A-90
- Q&A: Yakima Rack and Roll Trailer 66 Inches Disassembly for Storage
- Q&A: Installation and Torque of 1-1/4 Inch Shank Hitch Ball onto Ball Mount
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Video: Choosing the Right Brake Controller
- Article: Trailer Wiring Diagrams
- Search Results: 68149
- Shop: Brake Controller
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Search Results: dust cap