Hitch Tube Depth of Stealth Hitch that Fits 2019 Audi E-Tron

Question

Question:

1. It looks like the depth of the receiver - the distance a bike rack or other item could be ed - is limited. What is this depth? Have you verified that the Kuat NV 2.0 will fit this hitch with the limited ion distance? 2. If I purchase the receiver bike rack version now, can it be upgraded later with the trailer towing ball?

asked by: Mark H

0

Expert Reply:

The overall depth of the hitch attachment of the Stealth hitch part # SH34FR is 5-1/2 inches from front to back and then 3-1/2 inches from the pin hole to the very back of the hitch tube. Based on that we know the Kuat NV2.0 Base # BA22B and the NV 2.0 # NV22G are a confirmed fit and would work great.

To upgrade it to a kit that has the ball mount platform you'd need the part # SH39FR as well.

expert reply by: Jameson C

0

Inner Hitch Tube Depth
(click to enlarge)

Answer 1

There is indeed a fit for a trailer hitch receiver for your 2022 Audi e-tron and is even totally hidden, so it won't show at all when you aren't using it. In fact, there are two options depending on what you are using the hitch for: - Bike…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 7

There is a trailer hitch receiver as well as a 4-way wiring harness that fit your 2022 Jeep Grand Cherokee WL; that said, we don't have any way to reference a VIN so you'll need to confirm if you do have the WL, which is the new model of…

view full answer...

Answer 8

To replace your NOK AD2527E seal you can use #168233. It has an inner diameter of 1.688 inches and an outer diameter of 2.332 inches. Based on what I could find on the NOK AD2527E the inner diameter is the same and the outer diameter is 2.328 inches.…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

To add a hitch to your 2024 Toyota RAV4 Prime, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and…

view full answer...

Answer 11

For your 2018 Ram 2500 with the factory puck system the best 5th Wheel Hitch is the B&W OEM Companion. If you have the 8 foot bed then you will want the fixed 25K #BWRVK3600 and if you have the short 6-1/2 foot bed you will need the 20K Slider…

view full answer...