Optronics LED Light for Boat Trailer

Question

Question:

I was wondering if this would be the correct light for my boat trailer I included pictures I believe it is but want to check before I purchase it thanks

asked by: Brian W

0

Expert Reply:

Part # STL0067RPG does work for your boat trailer. The new light is the same dimensions as your old one, however the mounting studs might not line up with the factory holes in your trailer and may require new holes to be drilled. I have attached an install video to help you through the process of getting the new light installed.

expert reply by: Clayton O

0

Answer 1

The tail lights you have on your trailer are the ONE LED Trailer Tail Lights part #STL0067RPG for the driver side and part #STL0066RBG for the passenger side. Unfortunately, Optronics does not offer a replacement lens for this particular light so…

view full answer...

Answer 2

The ONE LED Trailer Tail Light part #STL0067RPG for driver or part #STL0066RBG for passenger has a three prong pigtail attached to the light so this may be what you're looking for. The ONE LED Trailer Tail Light measures 7-3/4" long x…

view full answer...

Answer 3

Would you be able to send me some pictures of what your current lights look like and the triangular plugs that you mentioned so I can help you get something that works best?

view full answer...

Answer 4

You will first want to check the fuses on your tow vehicle. Some vehicles could have fuses for operating the turn signals and brake lights of a towing package. You will want to check if they are installed and working properly. The next thing is to…

view full answer...

Answer 5

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Answer 6

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 7

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 8

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 9

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs and…

view full answer...

Answer 10

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 11

The Trailer Hub and Drum Assembly part #AKHD-545-35-K is the correct replacement for an AL-KO 7230. In regards to the braking assemblies, I suggest getting a new pair, the Electric Trailer Brake Kit part #AKEBRK-35-SA. This option will save you some…

view full answer...

Answer 12

The amount of bow that's put into trailer axles like the #7359765 is based on about how much a trailer is typically going to weigh that has a 3,500 lb capacity. So there's a bit of approximation and obviously it can't be totally perfect…

view full answer...